Application; Function - Honeywell 76910C1 Bedienungs- Und Installationsanleitung

Compact Call Set

Application

The compact call set (Part No. 76910C1 and 76910D1) is an independent, coordinated system delivered with
all necessary components for call initiation, indication / acknowledgement and power supply.
One typical application, for instance, is outfitting WCs and sanitary rooms in public buildings in which people
in need of help can initiate an emergency call in certain situations, such as after a fall.
4.1

Function

An emergency call is initiated via a pull cord that is specially suited for this application and indicated "locally"
in a highly visible fashion on the wall outside the room by the integrated signal lamp of the electronic module.
In addition, the red reassurance light in the pull cord lights to signal to the person in need that the call has been
sent.
With the duty room unit, it is possible to also visibly and audibly indicate the triggered call to people at another
(remote) location, such as care personnel or a porter. The red LED of the button on the duty room unit lights
and the integrated buzzer sounds. Pressing the button "BU Off / Delay", silences the buzzer for about 15-20
seconds, after which time it is triggered again.
After checking locally on the reason of the emergency call, the call can be reset by pressing the cancel button,
which also resets all triggered visual and audio indicators.
The compact call set is then returned to normal operation and ready for a call.

Duty unit

Cancel button

Electronic module

Pull cord
16
2
1
3
76910XE / 02.2018
4