Freeze Mode - Guntermann & Drunck DL-DVI-Vision-CAT-CON Installation Und Bedienung

Configuration
1. Click on
KVM Extenders > [All Extenders]
2. Double-click the computer module of the KVM extender to be configured.
3. Click the
General
4. Under Edid profile
[Auto]
GUD DVI ...
Name
5. Click OK to save your changes.

Freeze mode

If the cable connection between the computer module and the user module is inter-
rupted during operation, the KVM extender no longer displays an image at the remote
console.
Enable the Freeze mode if you want the last image that has been displayed at the user
module to be available until the connection is re-established.
To highlight an interrupted connection, the last available image can be displayed
with either a coloured frame and/or a
connection has been interrupted.
31 · G&D DL-DVI-Vision-CAT
tab.
select one of the following options:
 automatic treatment of EDID data default)
 sue of a G&D profile for a particular resolution
 EDID profile that has been read out by the user
on the directory tree.
Frozen popup and the time passed since the