Audio Video Settings - Yamaha BD-S1900 Bedienungsanleitung

Settings

Audio Video Settings

Speaker Settings
Quick Start
Auto Power Off
HDMI Control
Playback Setting
Communication Setup
Version
USB Memory Management
Software Update
System Reset
3. Select the next item
Press / to select the desired item, then press
ENTER.
Yes
Press RETURN to return to the previous "Menu"
page.
4. Exit the Menu screen
Press SETUP or EXIT to exit.
Example of the Setup Menu operation
Example: Setting "Parental Control" under "Playback
Setting"
1 Press SETUP to display the Setup Menu screen.
2 Press
/ / /
ENTER.
3 Press
/ to select "Playback Setting", then press
ENTER.
4 Press
/ to select "Parental Control", then press
ENTER.
– When you operate this Player for the first time, the
password setting screen will be displayed. See
"When setting the password for the first time"
below.
5 Enter your 4-digit password.
– You cannot move to the next setting screen until you
can input the correct password.
When setting the password for the first
time.
1. To set the password for the first time, press
select "Yes" to enter the password setting menu, then
press ENTER.
2. Enter a 4-digit number for the password, then the
same 4-digit number for confirmation.
3. Press ENTER to complete the password setting
procedure and move to the next setting screen.
Hints
– You can clear the 4-digit number by pressing
CLEAR.
30
En
No
to select "Settings", then press
/
– You can use ENTER on the lower right of the
Number buttons instead of ENTER in the Cursor
buttons.
6 Press
/ to select the parental control level for
DVD VIDEO, BD-ROM, and then select the country
code. Press ENTER after making each selection.
Parental Control
Disc Language
Angle Mark Display
Password Setting
BD Internet Access
7 Press SETUP or EXIT to exit.
■ Audio Video Settings
Hint
– The default settings are marked with "*".
TV Aspect Ratio
You can set the screen aspect ratio of the connected TV,
and adjust the video output.
If you switch your TV (i.e. because you have bought a
new one) and the screen aspect ratio of the connected TV
changes, you will have to change the "TV Aspect Ratio"
setting.
Wide 16:9* : Select this when connecting to a TV with a 16:9
screen aspect ratio.
Normal 4:3 : Select this when connecting to a TV with a 4:3
screen aspect ratio.
When selecting Normal 4:3
: If you playback a DVD with 16:9 video, the video
Letter Box*
will be played back with black bands at the top and
bottom while maintaining the 16:9 ratio.
Pan Scan : If you playback a DVD with 16:9 video, the video
will be played back with the left and right sides of
the image cut off to display in 4:3 screen aspect ratio.
(This function works if the disc is labelled for
4:3PS.)
Component Video Out
This sets the resolution of the component video output.
Some TV are not fully compatible with the Blu-ray disc
to
player, which may cause the image distortion. In this case,
press VIDEO-RESET on the remote control for five
seconds. "Component Video Out" will be reset to "480i/
576i" (factory preset value).
1080i, 720p, 480p/576p, 480i/576i*
Note
– Some discs prohibit high definition video output
from the COMPONENT jacks. In this case, the
video resolution is converted to 480p/576p or 480i/
576i.
Level 3
0
USA