Other Connections; Connecting To The Remote Control Jacks; Connecting The Power Cable - Yamaha BD-S1900 Bedienungsanleitung

■ Connecting to the REMOTE
CONTROL jacks
– You can transmit the remote control signals by
connecting to the REMOTE CONTROL (OUT/IN)
jacks.
– Firmly connect 3.5mm mini plug cables
(commercially available) to the REMOTE
CONTROL (OUT/IN) jacks (1 and 2, or 3 and
4).
Caution!
Be sure to turn off this Player and the
equipment before making any
connections.
This Player
OUT
ONENT
P COAXIAL
B
P S VIDEO OPTICAL
R
VIDEO OUT DIGITAL OUT
NETWORK
To REMOTE
1
CONTROL
(OUT) jack
3.5mm mini plug
cable
(commercially
available)
To remote
2
control in
jack
REMOTE CONTROL IN
IR flasher or Yamaha
component
Hint
– The RS-232C terminal is a control expansion
terminal for commercial use. Consult your dealer for
details.

Other Connections

IN RS-232C
REMOTE CONTROL
HDMI
USB
BD STORAGE/
SERVICE
To REMOTE
CONTROL (IN)
jack
3.5mm mini plug cable
(commercially available)
To remote
4
control out
jack
REMOTE CONTROL OUT
Infrared signal receiver
or Yamaha component
(such as AV receiver)

■ Connecting the power cable

– Plug the supplied power cable into the AC IN
terminal on the rear of the Player. Then plug into AC
outlet.
AC IN
To AC outlet
Note
– TO PREVENT RISK OF ELECTRIC SHOCK, DO
NOT TOUCH THE UN-INSULATED PARTS OF
ANY CABLES WHILE THE POWER CABLE IS
CONNECTED.
3
SURROUND
CENTER BACK SURROUND
L
R
SUBWOOFER
AUDIO OUT
To AC IN terminal
2
F
15
En