Conrad 1080 P Bedienungsanleitung Seite 51

=> Use the buttons "Up" (5) or "Down" (4) to select the desired minutes, then push the button
"Confirm" (9) and the recording duration lights up red (you may enter up to 98 minutes).
=> Push the button "Confirm" (9).
=> Proceed as described above for the other 4 recording times
=> Push the button "Menu" (3) again to return the setting mode
• Select the display "Auto Record" for automatic recording after a time previously programmed.
This function only becomes active when the included 12V car charging plug is con-
nected to the 12V charging socket of your car and the camera is switched off.
Proceed as follows:
=> Select the buttons "Up" (5) or "Down" (4) in the "Recording Mode".
=> Push the button "Confirm" (9).
=> After you have selected "Auto Record", push the button "Up" (5) or "Down" (4), push the button
"Confirm" (9) to return to setting mode.
=> Use the buttons "Up" (5) or "Down" (4) to select "Auto REC time".
=> Push the button "Confirm" (9).
=> You now may programme 4 different rep-set automatic recording times.
=> Use the buttons "Up" (5) or "Down" (4) to select the first setting "Off". This means that the automa-
tic recording time is deactivated. Push the button "Confirm" (9) to return to the setting mode.
=> Use the buttons "Up" (5) or "Down" (4) to select the setting "10 seconds" .
=> Push the button "Confirm" (9).
=> The display returns to the setting mode.
=> Push the button "MENU" again to return the camera to the recording mode.
=> Switch on the camera with the button "On" / "Off" (8).
=> Connect the included 12V charging cable and the 12V charging socket of your vehicle.
=> Attach the camera to the included suction cup (see description item 11 d).
=> The camera starts when you switch on the vehicle's ignition.
=> After approx. 10 seconds, the camera starts a recording automatically.
Proceed accordingly for automatic recording times "20 seconds" or "1 minute".
51