Maintenance And Cleaning; Service - Parkside PNKP 105 A1 Betriebsanleitung

Start-up / Maintenance and Cleaning / Service
2. Press both glued together work-pieces together immediately after
applying the glue for approx. 30 seconds. The glued area is resili-
ent after approx. 5 minutes.
3. Place the glue gun on its stand leg
Switching the device off:
Pull the mains plug from the socket.

Maintenance and cleaning

The low temperature glue gun is maintenance free.
WARNING! Unplug the mains plug from the socket before
cleaning.
Always keep the device clean, dry and free of oil or grease.
Do not allow liquids to enter the equipment. Please use a soft cloth
for cleaning the housing. Never use petrol, solvents or cleaning
agents that attack plastic.

Service

lified specialist personnel using OEM parts only. This will
maintain the safety of the device.
replaced, always have the replacement carried out by
the manufacturer or its service centre. This will maintain
the safety of the device.
22 GB
4
Have your appliance repaired by qua-
If the plug or mains lead needs to be
between gluing.