Herunterladen Inhalt Inhalt Diese Seite drucken

Original Accessories / Tools; Start-Up - Parkside PNKP 105 A1 Betriebsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

affected area under cold running water for several minutes. Do not
try to remove the glue from your skin.
Always run the power cable away from the appliance to the rear.

Original accessories / tools

Use only the accessories and attachments detailed in the operating
instructions, or those which are compatible with the device.

Start-up

Prepare the area to be glued:
Do not use any flammable solvents to clean the area.
The room temperature and the temperature of the material to be
glued may not be colder than +5 °C and no warmer than + 50 °C.
The area must be clean, dry and grease free.
Smooth out the surface before gluing.
Warm up cooled material such as e.g. steel for a better join.
1. Fold the stand leg
2. Put a glue cartridge in the feed canal
3. Let the device warm up for 5 minutes. The device is now ready to use.
Gluing:
Press the feed trigger
1. Apply the glue in dots. Apply the glue in a zigzag line on flexible
material e.g. textiles.
Safety instructions / Start-up
out. Set the device aside.
4
to start and control the flow of glue.
3
.
1
GB
21

Werbung

Kapitel

Inhaltsverzeichnis
loading

Inhaltsverzeichnis