IKEA BEJUBLAD Handbuch Seite 10

ENGLISH
the induction cooking zones automatically
return to cooking level
Power exchange function
• Cooking zones are grouped according to
the location and number of the phases in
the hob. See the illustration.
• Each phase has a maximum electricity
loading of 3700 W.
• The function divides the power between
cooking zones connected to the same
phase.
• The function activates when the total
electricity loading of the cooking zones
connected to a single phase exceeds
3700 W.
• The function decreases the power to the
other cooking zones connected to the
same phase.
• The power setting display of the reduced
zones changes between two levels.
Using the Timer
Touch repeatedly until the indicator of a
desired cooking zone flashes. For example
for the front right zone.
.
Touch or of the Timer to set the time
between 00 and 99 minutes. When the
indicator of the cooking zone flashes more
slowly, the time counts down. Set the power
setting.
If the power setting is set and the time set
has elapsed, an acoustic signal sounds, 00
flashes, and cooking zone deactivates. If
cooking zone is not in use and the time set
has elapsed an acoustic signal sounds and
00 flashes.
Touch to deactivate the function for the
selected cooking zone and the indicator for
this cooking zone flashes faster. Touch
and the remaining time counts backwards
to 00. The indicator of the cooking zone
goes out.
STOP+GO
The function sets all cooking zones that
operate to the lowest power setting
When the function operates, you cannot
change the power setting. The function does
not stop the timer function.
• To activate this function touch
symbol comes on.
• To deactivate this function touch
power setting that you set before comes
on.
Lock
When the cooking zones operate, you can
lock the control panel, but not deactivate
10
.
. The
. The