Herunterladen Inhalt Inhalt Diese Seite drucken

Network And Usb Connection; Connecting To The Network Terminal And Usb Port - Yamaha BD-S1067 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 92

■ Connecting to the NETWORK terminal and USB port

– PC contents can be played back by connecting this Player to the network.
– You can enjoy a variety of contents with interactive functions by connecting to the internet when playing BD-Live
compatible discs. Refer to page 25 regarding further information on BD-Live functions.
– You can connect a USB memory device (2 GB or greater and formatted with FAT 32/16) for BD Local Storage to
the USB port on the rear panel (or front panel) of the player to save the BD-Live data or to upgrade the software of
this Player. To save data on the USB memory device on the front panel, refer to "Local Storage" (p. 29).
– Firmly connect a network cable (commercially available) and a USB memory device (commercially available) to
the NETWORK terminal and USB port.
– Use only an STP (shielded twisted pair) network cable.
– When using the internet, a broadband internet connection as shown below is required.
– Connect the other connector of the network cable to the hub/broadband router.
Before using the USB memory device
CAUTION:
– Do not remove the USB memory device
or unplug the power cable while the
operations for Local Storage (p. 29) or
software upgrade are being performed.
– Do not use a USB extension cable when
connecting a USB memory device to the
USB port of the Player. Using a USB
extension cable may prevent the Player
from performing correctly.
Note
– Yamaha cannot guarantee that all brands'
USB memory devices will operate with
this Player.
Notes
– When using a broadband internet
connection, a contract with an internet
service provider is required. For more
details, contact your nearest internet service
provider.
– Refer to the operation manual of the
equipment you have as the connected
equipment and connection method may
differ depending on your internet
environment.
– Use a network cable/router supporting
10BASE-T/100BASE-TX.
After connecting
– When you set the Network setting manually, refer to "Network" (p. 31).
– To play back the PC contents on your network, refer to "Using network content" (p. 21).
16
En

NETWORK AND USB CONNECTION

Internet
This Player
To NETWORK
terminal
Network cable
(commercially available)
To LAN
terminal
LAN
Modem
Hub or
broadband router
To USB port
USB memory device
(commercially available)
PC

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis