Connecting To The Audio Jacks - Yamaha BD-S1067 Bedienungsanleitung

■ Connecting to the audio jacks

– You can connect audio equipment or the TV to the MIXED 2CH/7.1 ch surround jacks.
– Firmly connect audio pin cables (supplied and commercially available) to the MIXED 2CH jacks or 7.1 ch
surround jacks.
– See page 34 for information on the audio output formats.
– If you want to reproduce multi-channel SA-CD and DVD-Audio, connect 7.1 ch surround jacks to the
corresponding input jacks of your AV receiver using commercially available audio pin cables.
Caution!
Do not connect the power cable of this Player until all connections are completed.
This Player
To AUDIO OUT
MIXED 2CH jacks
F
To audio input
jacks
(White) (Red)
AUDIO
L
AUDIO IN
AV receiver
Hints
– You can connect a subwoofer to the SUBWOOFER jack directly. When you connect TV to this Player directly,
connect an active subwoofer such as Yamaha Active Servo Processing Subwoofer System to this jack.
– To output the audio signal from the MIXED 2CH/7.1 ch surround jacks, refer to "Speaker Setting" (p. 33).
Audio pin cable
(supplied)
F'
R
TV
G
To 7.1 ch
surround
jacks
Audio pin
cables
(supplied and
commercially
available)
To
MULTI
CH IN
jacks
CENTER SUBWOOFER SURROUND BACK
L
(White) (Red)
AUDIO CONNECTIONS
This Player
SURROUND FRONT
R L R L R
(White) (Red) (White) (Red)
MULTICH IN
AV receiver
15
2
En