Herunterladen Diese Seite drucken

Werbung

Side by Side
Instruction manual
Benutzerinformation
Manual de instruções
Gebruiksaanwijzing
Istruzioni per l'uso
Instrucciones de uso
Notice d'utilisation

Werbung

loading

Inhaltszusammenfassung für AEG Electrolux Side by Side SBSKITA2

  • Seite 1 Side by Side Instruction manual Benutzerinformation Manual de instruções Gebruiksaanwijzing Istruzioni per l’uso Instrucciones de uso Notice d’utilisation...
  • Seite 2 Important information • Do not install the unit on your own or have unqualified personnel install it. • Improper installation may result in damage, malfunctioning or risk of electric shock. • This Side by Side unit must have the cooler section on the right side and the freezer section on the left side; the positions are not reversible.
  • Seite 3 Informazioni importanti • L’installazione deve essere eseguita solo da personale qualificato. • Una installazione non corretta puo’provocare danni, malfunzionamento o rischio di una scossa elettrica. • Il side by side deve avere il frigorifero a destra e il congelatore a sinistra; le posizioni non sono reversibili. •...
  • Seite 4: Tools Required For Installation

    Tools required for installation (not supplied) (T) HAMMER (U) SCREW DRIVER PHILIPS 2 (V) SCREW DRIVER WRECH 7 mm (W) WRECH 13 mm (X) WRECH 24 mm (Y) L-SHAPED 3 mm HEXAGONAL (Z) LEVEL Für die Installation erforderliche Werkzeuge (nicht im Lieferumfang enthalten) (T) HAMMER (U) SCHRAUBENDREHER PHILIPS KREUZSCHLITZ 2...
  • Seite 5 Utensili necessari per l’installazione (non forniti) (T) MARTELLO (U) CACCIAVITE TESTA CROCE PH 2 (V) CACCIAVITE TESTA ESAGONALE 7 mm (W) CHIAVE ESAGONALE 13 mm (X) CHIAVE ESAGONALE 24 mm (Y) CHIAVE ESAGONA 3 mm (Z) LIVELLA Herramientas necesarias para la instalación (no se suministran) (T) MARTILLO (U) DESTORNILLADOR PHILIPS 2 (V) LLAVE INGLESA 7 mm...
  • Seite 7 Cuphead screw m5x12 ( bag. 1) RUNDKOPFSCHRAUBE M5x12 (Beutel 1) PARAFUSO DE CABEÇA REDONDA M5x12 (saco 1) KOPSCHROEF M5x12 (zakje 1) VITE A TESTA TONDA M5x12 (sacchetto 1) TORNILLO DE CABEZA CÓNCAVA M5x12 (bolsa 1) VIS À TÊTE BOMBÉEM5x12 (sachet 1) Hexagon-head screw m5x18 (bag 2) SECHSKANTKOPFSCHRAUBE M5x18 (Beutel 2) PARAFUSO DE CABEÇA SEXTAVADA M5x18 (saco 2)
  • Seite 8 Upper connection bracket OBERE ANSCHLUSSHALTERUNG SUPORTE DE LIGAÇÃO SUPERIOR BOVENSTE VERBINDINGSBEUGEL STAFFA DI COLLEGAMENTO SUPERIORE SOPORTE DE CONEXIÓN SUPERIOR PIECE D'ASSEMBLAGE SUPÉRIEUR Top panel OBERE BLENDE PAINEL SUPERIOR BOVENPANEEL PANNELLO SUPERIORE PANEL SUPERIOR PANNEAU SUPÉRIEUR Plinth SOCKEL PLINTO PLINT ZOCCOLO ZÓCALO PLINTHE Left side strip...
  • Seite 9 Gasket trim DICHTUNG VERKLEIDUNG FRISO DE VEDAÇÃO PAKKING SIERSTRIP COPRIFUGA EMBELLECEDOR DE JUNTA PLINTHE DROITE Spacer sponge (placed in the cooler appliance) SCHAUMGUMMI DISTANZSTÜCK (BEFINDET SICH IM KÜHLGERÄT) ESPONJA ESPAÇADORA (COLOCADA NO APARELHO DE REFRIGERAÇÃO) AFSTANDSHOUDER SCHUIMRUBBER (WORDT GEPLAATST IN HET KOELAPPARAAT) DISTANZIALE IN SPUGNA (SI TROVA NEL FRIGORIFERO) ESPONJA SEPARADORA (PARA EL APARATO REFRIGERADOR)
  • Seite 10 Handle assembled cooler GRIFF MONTIERT KÜHLGERÄT PUXADOR DO FRIGORÍFICO SAMENGESTELD HANDVAT KOELER MANIGLIA FRIGORIFERO MANILLA DEL REFRIGERADOR POIGNÉE DU COMPARTIMENT RÉFRIGÉRATEUR Rear spacer (placed in the cooler appliance) DISTANZSTÜCK HINTEN (BEFINDET SICH IM KÜHLGERÄT) ESPAÇADOR TRASEIRO (COLOCADO NO APARELHO DE REFRIGERAÇÃO) ACHTERSTE AFSTANDSHOUDER (WORDT GEPLAATST IN HET KOELAPPARAAT) DISTANZIALE POSTERIORE (SI TROVA NEL FRIGORIFERO)
  • Seite 11 • Carefully place the unit on the floor, following the instructions on the packaging to make sure the unit is facing upwards. • Open the bottom part of packaging and remove the corner protection. • Screw the M8 nuts (4) (bag 4) on the respective front feet , see Fig. (A). •...
  • Seite 12 • Deposite la unidad en el suelo con cuidado, siguiendo las instrucciones del embalaje para que quede en posición vertical. • Abra la parte inferior del embalaje y retire la protección de esquinas. • Atornille las tuercas M8 (4) (bolsa 4) en la pata delantera respectiva, consulte la Fig. (A). •...
  • Seite 14 • Glue the spacer sponge on the right side of the freezer, using the distances indicated in the fig. under neath. • Kleben Sie das Schaumstoff-Distanzstück auf die rechte Seite des Gefrierteils. Verwenden Sie die Maße, die in Abb. nachstehend angegeben sind. •...
  • Seite 15 • Glue the spacer sponge on the left side of the fridge, using the distances indicated in the fig. under neath. • Kleben Sie das Schaumstoff-Distanzstück auf die linke Seite des Kühlabteils. Verwenden Sie die Maße, die in Abb. nachstehend angegeben sind. •...
  • Seite 16 • Bring the units near to each other. • If necessary adjust the front feet so that the units are both the same height, see Fig. (A). • Insert joining bracket (5), see Fig. (B). • Fix the joining bracket with four M5x18 screws (bag (2)), see Fig. (C). •...
  • Seite 18 • Fix the joining bracket (6) with four 4.2x13 self-tapping screws (3) (bag (3) using the holes in the top of the sides, see Fig. (A). • The bracket must be positioned so that the side of the bracket with the hole in the centre part protrudes as shown in fig.
  • Seite 19 • Fije el soporte de unión (6) con cuatro tornillos autorroscantes 4,2x13 (3) (bolsa (3) en los orificios de la parte superior de los lados, consulte la Fig. (A). • El soporte debe colocarse de modo que sobresalga el lado con el orificio en el centro, como se muestra en la Fig.
  • Seite 21 • If it is necessary to amend the level of the doors, or one single door, partially unscrew the hinge screws, related to the door to be adjusted, and move the hinge as indicated in the illustration below. • Repeat the operations for each single door until a correct alignment is obtained. •...
  • Seite 23 • Before proceeding with the assembly of the top remove the protective film from the panel (7). • Position the top with the doors open so that the bottom front part fits under the top hinges., see Fig. (A) • Push the top so that its rear welt is touching the back of the units, see Fig.
  • Seite 25 1• Fix the top frontaly with three M5X12 screws (1) (bag (1), see Fig. (A). • Fix the back of the top with four 4.2x13 self-tapping screws (3) (bag (3), see Fig. (B). • Sichern Sie das Oberteil an der Vorderseite mit drei Schrauben M5X12 (1) (Beutel (1), siehe hierzu Abb. (A). •...
  • Seite 27 • Fit the trim “11” between the two units by pressing along the entire profile, see figure below. • Passen Sie die Verkleidung "11" zwischen den beiden Einheiten ein; drücken Sie dazu entlang des gesamten Profils. Siehe nachstehende Abbildung. • Monte o friso "11"...
  • Seite 28 • Before proceeding with the fixing of (9,10) side strips remove the protective film. • Insert the side strip, see fig. (A) • Align the outside of the side strip with the side of the unit and fix it with a 4.2x13 self-tapping screw (3) (bag (3)).
  • Seite 30 • Fit the handles, as shown in figures A, B and C. • The screws and grub screws are included in the handle-kit. • Fix the two mounting blocks (18) with two 4.2x13 self-tapping screws for each (bag (3)), see Fig. (A). •...
  • Seite 32 You should also ensure that air can circulate freely around the back and the top of the cabinet. Position the assembled Side by Side: • At least 150 mm from any overhanging kitchen furniture. • Install the appliance. • Inside the appliance you find two spacers (17) which must be fitted. Slacken the screws and insert the spacer under the screw head, then re-tighten the screws.
  • Seite 34 • After the positioning of the appliance, verify the right position with a level. • If necessary regulate the front feet to level the appliances. See Fig. (A) • Lock the M8 (4) nuts, see Fig. (B). • Nachdem das Gerät korrekt aufgestellt wurde, prüfen Sie bitte die waagerechte Ausrichtung mit einer Wasserwaage nach.
  • Seite 36 • Before proceeding with the fixing of the plinth (8) remove the protective film. • Fit the plinth (8) so that the inner hook couples with the joining bracket as shown in the illustration (see Fig. A). • Fix the front of the plinth (8) with two M5x12 screws (1) (bag(1) ) see Fig. (B) •...
  • Seite 40 08/08 2221 055-80...