MAINTENANCE
IMPORTANT:
Cleaning the perimeter extraction panel
Removal:
pull the handle (FRONT) firmly downwards.
Cleaning:
The extraction panel must be cleaned as often as the grease filter, using a rag moistened with neutral
liquid detergent.
Do not use products containing abrasives.
IMPORTANT: Do not use alcohol.
Fitting:
The panel must be fixed at the front, in the special pins on the hood surface.
IMPORTANT: Always make sure the panel is firmly fixed in place.
DESCRIPTION AND USE OF HOOD
1. Control panel.
2. Grease filters (over the perimeter extraction panel).
3. Halogen lamps.
4. Telescopic flue.
5. Perimeter extraction panel.
Control panel
a. Light ON/OFF button
b. Motor ON/OFF and minimum speed (extraction power) selection button
c. Medium speed (extraction power) selection button
d. Maximum speed (extraction power) selection button
- Disconnect the appliance from the power supply
a
GB14
b
c
d