Intended Purpose; Equipment Components; Scope Of Delivery; Technical Data - Parkside PABS 14.4 A1 Betriebsanleitung

Introduction
Cordless drill PABS 14.4 A1
Introduction
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as described
and for the specified applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.

Intended purpose

This appliance is designed for drilling and screwing
into wood, plastic and metal. Use the appliance only
as described and only for the purposes indicated.
Any other uses, and modifications to the appliance,
are deemed to be improper usage and may result
in serious physical injury. The manufacturer accepts
no responsibility for damage(s) resulting from
improper usage. The appliance is not intended for
commercial use.

Equipment Components

Gear selector switch
1
Direction of rotation switch / lock
2
ON / OFF Switch / R.P.M. regulator
3
Rechargeable battery pack
4
Battery pack release button
5
Rechargeable battery display LED
6
Rechargeable battery charge state button
7
LED working light
8
Drill chuck
9
Torque pre-selector
10
Fast charger
11
Red charge-control LED
12
Green charge-control LED
13
26 GB

Scope of delivery

1 Cordless drill with rechargeable battery pack
1 Bit PZ2 50 mm
1 Fast charger
1 Carry case
1 Directions for use

Technical Data

PABS 14.4 A1 Cordless drill:
Nominal voltage:
Idle-running speed:
Idle-running speed:
Drill chuck
clamping range:
Max. torque:
PABS 14.4 A1-1 Battery Pack:
Type:
Nominal voltage:
Capacity:
PABS 14.4 A1-2 Fast Charger:
INPUT:
Nominal voltage:
Power input:
OUTPUT:
Nominal voltage:
Charging current
Charging time:
Protection class:
Noise and vibration data:
Measured values for noise are determined in accor-
dance with EN 60745. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level: 67 dB(A)
Sound power level:
Uncertainty K:
14.4 V
1st gear: max. 400 min
2nd gear: max. 1300 min
max. 10 mm
25 Nm
LITHIUM-ION
14.4 V
1.3 Ah
230 V∼, 50 Hz
30 W
14.4 V
1.5 A
approx. 60 min
II /
78 dB(A)
3 dB
-1
-1