Introduction; Proper Use; Features; Package Contents - Parkside PASS 3.6 B2 Betriebsanleitung

CORDLESS SCREWDRIVER
PASS 3.6 B2

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
are part of this product. They contain important
GB
information on safety, use and disposal. Before
using the product, familiarise yourself with all
operating and safety instructions. Use this product
only as described and only for the specifi ed areas
of application. Please also pass these operating
instructions on to any future owner(s).

Proper use

This appliance is designed for screwing into wood,
plastic and metal. Use the appliance only as described
and only for the areas of application specifi ed.
Any other uses or modifi cations to the appliance
are deemed to be improper usage and may result
in serious physical injury. Not for commercial use.

Features

ON/OFF switch
Rotation direction switch/safety lock-out
LED
Tool holder
Locking collar
Torque setting
Battery level display
Locking button
Charging socket (appliance)
Charger

Package contents

1 cordless screwdriver PASS 3.6 B2
1 charger PASS 3.6 B2-1
1 carrying case
24 bits x 25 mm
2 bits x 50 mm
1 bit extension
1 operating instructions
18

Technical details

Cordless screwdriver: PASS 3.6 B2
Rated voltage:
Battery (integrated):
Battery capacity:
Nominal idle speed:
Torque:
Tool holder:
Charger:
INPUT:
Rated voltage:
Rated current:
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
Noise and vibration data:
Noise measurement determined in accordance
with EN 60745 The A-rated noise level of the
power tool is typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Vibration values (vector total of three directions)
determined in accordance with EN 60745
Screws: Vibration emission value ah = 0.393 m/s
Uncertainty K = 1.5 m/s
The vibration level specifi ed in these instructions has
been measured in accordance with the standardised
measuring procedure specifi ed in EN 60745 and
can be used to make equipment comparisons.
The specifi ed vibration emission value can also
be used to make an initial exposure estimate. The
vibration level varies in accordance with the use of
the power tool and may be higher than the value
specifi ed in these instructions in some cases. It is
easy to underestimate the vibration load if the
electrical power tool is used regularly in a certain
manner.
3.6 V
LITHIUM-ion
1500 mAh
n = 200 min -1
0
max. 4.0 Nm
6.35 mm (¼")
PASS 3.6 B2-1
230 - 240 V∼ 50/60 Hz
200 mA
5.5 V
600 mA
approx. 3 hours
II /
57 dB(A)
68 dB(A)
3 dB
2
PASS 3.6 B2
2