Herunterladen Diese Seite drucken

Symbols Used In The Instructions; General Notes On Safety - Parkside PAS 500 D3 Betriebsanleitung

Vorschau ausblenden

Werbung

Inhaltsverzeichnis
Symbols used in the
instructions
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Notice symbol with information on
how to handle the device properly.

General notes on safety

This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental capa-
bilities or lack of experience and
knowledge if they have been given
supervision or instruction concer-
ning use of the appliance in a safe
way and understand the hazards
involved. Children shall not play
with the appliance. Cleaning and
user maintenance shall not be
made by children without supervi-
sion.
The information contained in these
operating instructions must be ob-
served. In addition, legal safety
and accident prevention regulations
must also be observed.
Caution: when using the equip-
ment, observe the following basic
safety measures in order to protect
against the risks of injury and fire:
To avoid accidents and injuries
from electric shocks:
Ensure that the power cord is not
damaged by being pulled over sharp
edges, by jamming, or by pulling on
the power cord.
Before each use, check the power sup-
ply lead and the extension cable for
damage and ageing. Do not use the
equipment if the cable is damaged or
worn. Danger of electric shock hazard.
If the power cord for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
Switch the machine off and disconnect
the mains plug:
- when the machine is not in use,
- before the machine is opened up,
- for all maintenance and cleaning
work,
- if the connecting cable is damaged
or tangled up.
Do not use the power cord to pull
the plug out of the socket. Protect the
power cord from heat, oil, and sharp
edges.
Make sure that the mains voltage cor-
responds with the information on the
rating plate.
Only plug the appliance into a socket
which is safeguarded by at least
13 A.
The device must be connected to a
mains socket via a residual-current
circuit breaker (RCD) with a rated leak-
age current of not more than 30 mA.
Do not expose the equipment to the
rain. Do not use the equipment in a
damp or wet environment.
Protect yourself from electric shocks.
Avoid bodily contact with earthed
GB
19

Werbung

Kapitel

Inhaltsverzeichnis
loading

  Andere Handbücher für Parkside PAS 500 D3

  Verwandte Anleitungen für Parkside PAS 500 D3

  Verwandte Inhalte für Parkside PAS 500 D3

Diese Anleitung auch für:

Pas 500 d2Ian 90977