BASKETBALL
Set-up
Connect all the control consoles to each other (the control consoles can be connected in any order). The
"Individual fouls/points" control console is only supplied with scoreboards equipped with individual fouls
modules.
Press the ON/OFF key until the console displays the welcome screen.
Programming
Select the "Basketball" mode with key 1.
The console screen displays the stored configuration during a few seconds: length of the pre-match
period, number and length of game periods, length of the extra-time periods, length of the time-outs.
Press key 18 to view the data on the console screen longer.
Change the configuration with key 0 or play with the stored configuration with key 9.
To change configuration: answer the various questions displayed on the console screen with keys 0 to 9,
and enter your answer with key 23.
During programming, it is always possible to come back to the previous programming with key 13.
Pre-match timer / Game timer
Some of the timer features can also be controlled by the separate timer control console (See. "Functions
of the separate timer control console" – Page 5).
Start or stop the pre-match timer with key 18.
If needed, stop the pre-match timer to charge the 1
Start or stop the game timer with key 18.
Display on the console screen the elapsed game time instead of the remaining time and vice versa with
key 21.
End of the first game periods: the rest timer starts automatically in count-up mode.
If the game timer was not stopped quick enough at the end of the period: come back to the game timer
by pressing keys 16 and 18 simultaneously.
Stop the rest timer and load a new game period or an extra-time period with key 28.
The number of team fouls goes back to zero (except at extra-time period).
The number of time-out requests only reaches zero at half game time and at extra-time periods.
End of the last game period and end of each extra-time period: the rest timer does not start
automatically. If needed, press key 18.
Correction of the game timer:
stop the game timer with key 18, then enter in timer correction mode by pressing keys 16 and
18 simultaneously.
shorten the game time with key 16 or increase it with key 20. Enter with key 18.
ZI de Bel Air 44850 LE CELLIER FRANCE
UA452MXX0XX_A - Control console 452M.docx
st
game period with key 28.
stramatel@stramatel.com
Tél. +33 (0)2 40 25 46 90
Page 10