Set-Up And Programming; Set-Up; Select A Sport Or A Function; Programme The Parameters Of The Sports - Stramatel Multisport Serie 452 Bedienungsanleitung

SET-UP - PROGRAMMING

Set-up

Make sure the scoreboard is powered.
Connect all the control consoles to each other (the control consoles can be connected in any order).
The "individual fouls/points" control console is only supplied with scoreboards equipped of individual fouls
modules. The "24 seconds" control console is supplied with ball possession timers (Model SC24).
Cable transmission model or radio controlled model supplied with the cable kit option: connect the 10
meters flexible cable between the control consoles and the wall junction box.
Press the ON/OFF key until the console displays the welcome screen.
Radio controlled model: the remaining battery charge level is indicated next. If the battery charge is
insufficient for the match, power can be supplied by plugging in the power supply supplied.
The control console will then enter into the last sport programmed. To change the sport or access to the
"general configuration" mode (See. "Various configurations" – Page 8): press key 27 several times.

Select a sport or a function

Press key 27 several times (access to the sport menu).
Then, select the sport or the function needed with the key number indicated on the console screen.
Change the sport configuration with key 0 or play with the backup configuration with key 9.

Programme the parameters of the sports

Each sport has its own configuration (parameters): length of game periods, length of the extra-time
periods, number of sets or number of periods, etc... These parameters are saved in memory in case the
control console is switched off or a new sport programmed (what makes the use of the console easier in
case of several clubs using it).
Choose a sport: the console screen displays the stored configuration for this sport during a few seconds.
Press key 18 to view the data on the console screen longer.
Press key 18 again once this data have been read.
Change the configuration with key 0 (see below) or play with the stored configuration with key 9 (direct
access to the game).
To change configuration: come back to the source configuration of the console in this sport with key 9 or
keep the last parameters with key 0.
Answer the various questions displayed on the console screen. For each question, the control console
offers the last stored configuration (the data blinks on the console screen):

enter this answer with key 23.

select another answer with keys 0 to 9.

programme lengths of time with keys 0 to 9 and and enter time with key 23.
During programming, it is always possible to come back to the previous programming with key 13.
ZI de Bel Air 44850 LE CELLIER FRANCE
UA452MXX0XX_A - Control console 452M.docx
stramatel@stramatel.com Tél. +33 (0)2 40 25 46 90
Page 6