Bauknecht BLPE 7104 Benutzerhandbuch Seite 35

Pizza
1. Turn the Functions knob to symbol
proceed as follows:
2. Turn the "Browse" knob: "PIZZA" appears on the display.
3. Press to select the function.
3
4. Turn the "Browse" knob to set the required temperature (between 220°C and 250°C) and confirm with
button .
3
5. Turn the "Browse" knob to set the required cooking duration and press
AUTOMATIC OVEN CLEANING
For the description of this function, see the chapter CLEANING and the functions table at page 34.
To activate the oven's automatic cleaning cycle (pyro-cleaning), proceed as follows:
1. Turn the "Functions" knob to symbol
2. Press button to confirm your choice and start the pyro-cleaning cycle.
3
To select ECO pyro-cleaning, turn the "Browse" knob: the word ECO appears bottom right on the display.
Press button to start the shorter programme.
3
During pyro-cleaning, the oven door is automatically locked and the symbol
door remains locked at the end of the cleaning cycle: "COOL" appears on the display, indicating the oven
is still cooling down. When the oven cools to a safe temperature, the symbol
shows "END".
N.B.: if the automatic door lock control procedure fails to execute properly, the symbol
display. If, on the other hand, the door remains closed due to a fault in the locking system,
LATCHED" appear on the display. In this case, contact the After-sales Service.
SETTINGS
Turn the "Functions" knob indicator to the symbol
settings which can be changed.
Clock
Turn the "Functions" knob to the symbol
of day, see the previous paragraph (SETTING THE TIME).
Eco
With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after
the end of cooking. In addition, the oven light is switched off during cooking. To view information on the
display and switch the light on again, simply press button
1. Turn the "Browse" knob to display "ECO.
2. Press to access the setting (ON/OFF).
3
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button
Acoustic signal
To activate or deactivate the acoustic signal, proceed as follows:
1. Turn the "Browse" knob to display "SOUND.
2. Press to access the setting (ON/OFF).
3
3. Turn the "Browse" knob to select the desired setting and confirm by pressing button
Brightness
To change the display brightness, proceed as follows:
1. Turn the "Browse" knob to display "BRIGHTNESS.
2. Press button : number 1 appears on the display.
3
3. Turn the "Browse" knob to increase or decrease brightness and confirm by pressing
: the display shows "BREAD". To select the "PIZZA" function,
: the word PYRO appears on the display.
to access a submenu containing four display
: the word CLOCK appears on the display. To change the time
or turn a knob.
3
GB33
to start cooking.
3
appears on the display. The
switches off and the display
appears on the
and "DOOR
.
3
.
3
.
3