Before Using The Appliance; Preparation Of Ice Cream - Unold Modell 48816 Bedienungsanleitung

BEFORE USING THE APPLIANCE

1. Before assembling the appliance, check if all parts are complete and remove
all packing materials. Keep packaging materials away from children - danger
of suffocation!
2. Before using the appliance for the first time, wash the removable parts
except motor block (1) and compressor housing (6) in warm soapy water.
3. Wipe the motor block and the compressor housing with a damp cloth.
4. Place the appliance on a flat and dry surface.

PREPARATION OF ICE CREAM

Control lamp
KÜHLEN/Cooling
ON/OFF
1. Prepare the ingredients according to the respective recipe. If the ingredients
must be cooked before, do this the day before as the ice cream mass must
be cooled down before filling it into the ice machine.
2. Mash fruits only directly before preparing the ice cream, add fruit pieces
only at the end of the freezing procedure.
3. Cool the prepared ice mass resp. the ingredients in the refrigerator to a tem-
perature of approx. 6–8 °C.
4. Fill the cooled ingredients into the ice cream bowl (4). Do not exceed the
maximum filling quantity of ¾ of the ice cream bowl volume, as the ice
cream will get more volume during freezing.
5. Use alcohol only in small quantities as it prolongs the freezing time.
6. Place the sealing ring (5) on the upper edge of the recess (6).
7. Place the filled ice cream bowl (4) into the recess of the compressor hous-
ing (6).
8. Place the mixer (3) onto the transparent lid(2).
9. Place the transparent lid (2) together with the mixer (3) on top and turn it
clockwise (bayonet lock).The opening for refill of ingredients must be at the
left side.
Copyright UNOLD AG | www.unold.de
ZEITWAHL/Time
selection
Control lamp
RÜHREN/Mixing
START/STOP
27