Connecting To Your Home Network; Network Connection - Pioneer BCS-707 Bedienungsanleitung

28 Installation
Connecting to your
Home Network
This player can be connected to a local area
network (LAN) via the LAN port on the rear
panel.
Please refer to the documentation for your
network device for further instructions.
Connect the player's LAN port to the
corresponding port on your Modem or Router
3
using a commercially available LAN or Ethernet
cable (CAT5 or better with RJ45 connector).
In the example confi guration for wired
connection below, this player would be able to
access content from either of the PCs.

Network Connection

Router
Router
WAN
LAN 1
LAN 2
LAN 3
NOTE
• When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
• Do not connect a modular phone cable to the
LAN port.
• Since there are various connection
confi gurations, please follow the specifi cations
of your telecommunication carrier or internet
service provider.
• If you want to access content from PCs or DLNA
servers, this player must be connected to the
same local area network with them via a router.
Broadband
Broadband
Service
Service
PC
PC
Player
Player