Cleaning And Maintenance; Descaling The Water Tank - Philips Avent SCF870/21 Bedienungsanleitung

ENGLISH
14

Cleaning and maintenance

Clean the appliance after every use.
Never immerse the motor unit in water.
Never use bleach or chemical sterilising solutions/tablets in the appliance.
Never use scouring pads, abrasive cleaning agents or aggressive liquids such as petrol,
acetone or alcohol to clean the appliance.
1 Unplug the appliance and remove the jar from the motor unit (Fig. 19).
2 Remove the lid from the jar and turn the lid upside down (Fig. 20).
3 Remove the sieve and the valve from the lid. (Fig. 21)
4 Clean the valve in hot water with some washing-up liquid and rinse it under the tap.
5 Remove the blade unit from the jar (Fig. 22).
6 Clean the blade unit under the tap thoroughly, immediately after use.
Make sure you also rinse the inside of the tube of the blade unit (Fig. 23).
Handle the blade unit very carefully. The cutting edges are very sharp.
Note: If you want to clean the blade unit more thoroughly, you can also place it in the dishwasher after
you have rinsed it.
7 Clean the other parts that have come into contact with food in hot water with some
washing-up liquid immediately after use.
Note: All parts, except the motor unit, can also be cleaned in the dishwasher.
8 If necessary, clean the motor unit with a moist cloth.
9 Check if any food particles have entered the water tank. You can do this by looking into the
filling opening to see if there are any food particles in it or by checking if the water has an
unusual colour and by smelling if the water tank produces an unpleasant or a burnt smell.
If this is the case, clean the water tank (see section 'Cleaning the water tank' in this chapter).
10 Leave the lid of the filling opening open to prevent bacterial growth.

Descaling the water tank

If food particles enter the water tank, they may get stuck onto the heating element in the water tank
during the next steaming processes. These particles cannot be removed by just rinsing the water tank.
In addition, you have to descale the appliance every four weeks to ensure it continues to work 100%
effectively. To reduce scale build-up, it is helpful to use pre-boiled or filtered water in the appliance.
To remove food particles inside the water tank and to descale the appliance, follow the descaling
instructions below.
1 Make sure the appliance is switched off.
2 Add 50ml white vinegar (8% acetic acid) to 150ml water.
Note: You can also citric acid based descalers. Do not use other types of descalers.
3 Fill the water tank with the solution of vinegar (or citric acid) and water.
4 Close the lid of the filling opening.
5 Place the empty jar (without any food inside) fully assembled with blade unit and lid on the
motor unit in steaming position (i.e. with the lid pointing downwards).