Troubleshooting - Kalorik Exc Rfg 1 Handbuch

Fax +32 2 359 95 50

TROUBLESHOOTING

1. When the refrigerator is not in use for a prolonged period of time:
Remove the power plug from the power supply.
-
Remove all contents from the refrigerator.
-
Dry the interior and leave the door open for a few days.
-
2. When you wish to move the refrigerator:
Secure all movable parts and contents (and pack them separately if necessary).
-
Transport the refrigerator only in an upright position.
-
3. If the refrigerator seems to warm inside:
Check that the door has not been opened too frequently or for a long period.
-
Check that the interior circulation is not obstructed by having too many goods
-
stored (the refrigerator is overloaded).
Has anything hot been stored, without having it cooled to room temperature first?
-
Is there sufficient clearance around and above the refrigerator?
-
4. If the refrigerator starts making any unusual noises:
Is it wobbling? Re-level it and check if it now operates normally.
-
Have any objects fallen behind the refrigerator? If so, remove them and check if
-
operation is now normal.
Are any containers inside the refrigerator vibrating or resonating? If so, rearrange
-
them then check to see if operation has returned to normal.
5. If the light inside flashes:
The set temperature is higher than the inner temperature. The automatic defrost
-
function is starting to work.
PROTECTION OF THE ENVIRONMENT – DIRECTIVE 2002/96/EC
In order to preserve our environment and protect human health, the waste electrical and
electronic equipment should be disposed of in accordance with specific rules with the
implication of both suppliers and users. For this reason, as indicated by the symbol
rating label or on the packaging, your appliance should not be disposed of as unsorted
municipal waste. The user has the right to bring it to a municipal collection point performing
waste recovery by means of reuse, recycling or use for other applications in accordance with
the directive.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don't change the page numbering. Keep the
language integrity.
15
Assembly page 15/40
on the
EXC RFG 1 - 110310