Introduction; Proper Use; Description Of Parts And Features; Included Items - Parkside PET 25 A1 Bedienungsanleitung

Introduction

Electric nailer / stapler PET 25 A1
Introduction
Q
We congratulate you on the purchase of your new
device. You have chosen a high quality product. The
instructions for use are part of the product. They
contain important information concerning safety,
use and disposal. Before using the product, please
familiarise yourself with all of the safety information
and instructions for use. Only use the unit as de-
scribed and for the specified applications. If you
pass the product on to anyone else, please ensure
that you also pass on all the documentation with it.

Proper use

Q
The electric nailer / stapler is suitable for domestic use
and is intended for stapling cardboard, insulation,
leather, cloth (textile or natural fibres) or similar ma-
terials on to hardwood, softwood, chipboard or
similar plywood-type materials. The device is suitable
for use in dry rooms only. Any other use or modifica-
tion to the device shall be considered as improper
use and could give rise to considerable dangers.
The manufacturer accepts no liability for loss or
damage arising from improper use. Not suitable
for commercial use.
Description of parts
Q
and features
Trigger
1
ON / OFF switch
2
Impact force controller
3
Magazine slider
4
Magazine
5
Magazine filling level indicator
6
Front plate
7
6 GB

Included items

Q
1 Electric nailer / stapler PET 25 A1
300 Staples 25 mm
200 Staples 15 mm
300 Nails 32 mm
200 Nails 25 mm
1 Allen key
1 Operating instructions

Technical data

Q
Model: PET 25 A1
Rated voltage: 230 V∼ 50 Hz
Firing speed: 30 / min
Short-term operation: max. 15 min
Protection class: II /
Staple width: 6 mm
Staple length: 15–25 mm
Type 55
15–25 mm
Nail length:
Type 47
15, 20, 25,
32 mm
Noise and vibration data:
Measured values for noise are determined in accord-
ance with EN 50144. The A-weighted noise level
of the electrical power tool are typically:
Sound pressure level:
Sound power level:
Uncertainty K:
Wear hearing protection!
Vibration total values determined according to
EN 50144:
Vibration emission value a
Uncertainty K < 1.5 m/s
The vibration level given in these
instructions has been measured in accordance with
a standardised measurement procedure specified in
15, 20, 25, 32 mm
83.1 dB(A)
91.3 dB(A)
2.5 dB
= 5.615 m/s ,
2
h
.
2