Electrical Safety; Personal Safety; Careful Handling And Use Of Electrical Power Tools - Parkside PHP 500 B2 Bedienungs- Und Sicherheitshinweise

never be allowed to use the device
without supervision or instruction by
a person responsible for their safety.
Children must never be allowed to play with
the device.
A tteNtIoN! This tool must be placed down
on its wire stand
6

2. electrical safety

a) the mains plug on the device must
match the mains socket. the plug must
not be modified in any way. do not
use an adapter plug with devices fitted
with a protective earth. Unmodified
plugs and matching sockets reduce the risk of
electric shock.
b) Avoid touching earthed surfaces such
as pipes, radiators, ovens and refrig-
erators with any part of your body.
There is an increased risk of electric shock if
your body is earthed.
c) Keep the device away from rain or
moisture. Water entering an electrical device
in creases the risk of electric shock.
d) do not use the mains lead for any pur-
pose for which it was not intended,
e.g. to carry the device, to hang up
the device or to pull the mains plug
out of the mains socket. Keep the lead
away from heat, oil and sharp edges.
Do not touch the mains lead if it becomes
damaged or severed while you are working,
instead pull the mains plug out of the mains
socket immediately. Damaged or tangled
mains leads increase the risk of electric shock.
e) When working outdoors with an elec-
trical power tool always use extension
cables that are also approved for use
outdoors. The use of an extension cable suitable
for outdoor use reduces the risk of electric shock.

3. Personal safety

a) Remain alert at all times, watch what
you are doing and always proceed
when it is not being used.
with caution. do not use the device if
you are tired or under the influence of
drugs, alcohol or medication. One moment
of carelessness when using the device can lead
to serious injury.
b) to avoid the danger of injury, burning
and damage to health:
dANGeR oF BURNS! The glue and the
nozzle can reach temperatures of 200 °C. Do
not touch the nozzle or the glue. Keep other
people and animals away from the hot glue.
On contact with the skin, hold the affected part
under running cold water for several minutes.
Do not try to remove the glue from the skin.
4. Careful handling and use
of electrical power tools
a) Pull the mains plug from the socket
before you make any adjustments to
the device, change accessories or when
the device is put away. This precaution is
intended to prevent you from unintentionally
starting the device.
b) When not in use always ensure that
electrical power tools are kept out of
reach of children. do not let anyone
use the device if he or she is not
familiar with it or has not read the
instructions and advice. Electrical power
tools are dangerous when they are used by
inexperienced people. Let the device cool
down completely before putting it away. The
hot nozzle can cause damage.
c) Look after the device carefully. Check
that moving parts are working prop-
erly and move freely. Check for any
parts that are broken or damaged
enough to detrimentally affect the
functioning of the device. Have dam-
aged parts repaired before you use
the device. Many accidents have their origins
in poorly maintained electrical power tools.
d) Always work with the mains lead leading
away from the rear of the device.
Safety notes
GB 25