Switching On And Off / Setting The Speed Range; Advice On Working With Materials / Tools / Speed Ranges - Parkside PMGS 12 B2 Bedienungs- Und Sicherheitshinweise

Operation
Switching on and off /
Q
Setting the speed range
Switching on / Setting the speed range:
C onnect the plug
4
by inserting it into the plug-in device
for such purposes (see Fig. C).
C onnect the device to the power supply by
inserting the mains plug into the socket.
Press down the ON / OFF switch
move it in direction of the rotational speed con-
trol . Then set the rotational speed control to
1
a position between "5" and "20".
Switching off:
Set the rotational speed control
"5". Press down the ON / OFF switch
then move it in direction of the cable.
Advice on working with
Q
materials / Tools / Speed ranges
U se the highest speed when working on steel
or iron with the milling bits
U se a short trial on a test piece to determine the
optimum rotational speed range for working on
zinc, zinc alloy, aluminium, copper and lead.
U se the low speed range for working on plastics
and low-melting point materials.
U se high speeds on wood.
U se the medium speed range for cleaning,
polishing and buffing.
The following information shall be considered as
recommendatory only. Learn by practical experience
which tools and settings are the best for the materi-
als you work with.
Setting the appropriate speed:
Numeral on the Material to be
rotational speed worked on
control
1
5
8
14 GB/IE
to the power supply unit
provided
8
and then
2
to position
1
and
2
.
20
Plastics and low melting
point materials
Stone, Ceramics
Numeral on the
rotational speed
control
1
12
10
16
20
Examples of appropriate tool selection
Function:
Function Accessory
Drilling HSS drill
Milling Milling bits
20
Engraving Engraving
bits
Polishing, Metal brush
derusting 16
Polishing
wheel
CAuTION!
Use only the
lightest con-
tact pressure
of the tool on
the work-
piece.
Cleaning Plastic brush
19
Grinding Grinding
wheels
grinding bits
22
Cutting and Cutting discs
sawing
17
Material to be
worked on
Softwood, metal
Hardwood
Steel
Application
Drilling wood
12
Various tasks, e.g.
hollowing out,
gouging, shaping,
grooving or slotting
Making marks,
craft projects
21
(see Fig. D)
Derusting
Working on vari-
ous metals and
14
plastics, in particu-
lar noble metals
like gold or silver
(see Fig. E)
E.g. cleaning com-
plex plastic hous-
ings or the area
around a door lock
Grinding work on
, stone, wood; fine
15
work on hard mate-
rials such as ceramic
or alloyed steel
(see Figs. F, G)
Cutting metal,
plastic or wood