Introduction; Proper Use; Features - Parkside PSBM 500 A1 Originalbetriebsanleitung

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
observe caution and safety notes!
Caution – electric shock!
Danger to life!
Explosive material!
Risk of fire!
V ~
Volt (AC)
W
Watts (Effective power)
Safety class II
Impact drill PSBM 500 A1
Introduction
Q
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important in-
formation concerning safety, use and disposal. Be-
fore using the product, please familiarise yourself
with all of the safety information and instructions
for use. only use the unit as described and for the
specified applications. If you pass the product on
to anyone else, please ensure that you also pass
on all the documentation with it.

Proper use

Q
The tool is intended for Impact drilling into brick,
concrete and stone as well as drilling into wood,
36 GB
Drilling
Impact drilling
Wear hearing protection, dust protec-
tion mask, protective gloves and pro-
tective glasses.
Keep children away from electrical
power tools!
Check that the device, mains lead
and plug are in good condition!
Dispose packaging and appliance in
an environmentally-friendly way!
Quick-release chuck
metal, ceramics and plastic (see Fig. B-E). The clock-
wise / counter clockwise rotation direction switch also
allows the device to be used as a driver. Any other
use or modification to the device shall be considered
as improper use and could give rise to considerable
risk of accident. The manufacturer will not accept li-
ability for loss or damage arising from improper use.
The device is not intended for commercial use.

Features

Q
Quick-action drill chuck
1
Front casing
2
Back casing
3
Changeover switch "drill / percussion drill"
4
Locking button for oN / oFF switch
5
oN / oFF switch
6
Rotational direction switch
7
Depth stop
8
Wing screw
9
Additional handle (see Fig. A)
10