Electrical connection
GB
IE
Operating components
Stand with carry handle
Operating switch
2
3
Temperature regulator
4
Mains power cable
Handling and operation
Operating switch
Temperature regulator
8
For safe and faultless operation of the appliance after electrical connection
observe the following advice:
TAKE NOTE
►
Before connecting the appliance compare the connection data (voltage
and frequency) on the rating plate with that of your mains power supply.
This data must be in agreement so as to avoid damage to the appliance.
►
Make sure that the mains power cable is not damaged and is not running
over hot surfaces and/or sharp edges.
►
Make sure that the mains power cable is not stretched or knotted.
♦
Insert the plug into a mains power socket.
In this chapter you receive important information for the handling and operation
of the appliance.
The operating switch
2
heating levels on and off .
The temperature regulator
By turning it clockwise a higher temperature is set, by
turning it anti-clockwise a lower temperature will be set.
has 4 positions and switches the ventilator and the
= Appliance switched off
= only ventilator
= Ventilator and heating level 1
= Ventilator and heating level 2
3
is steplessly adjustable.
PHG 3000 C3