Cleaning; Service; Warranty; Disposal - Parkside PHLG 2000 C2 Bedienungs- Und Sicherheitshinweise

Cleaning

Q
Before carrying out work on the
appliance, always remove the plug from the
power socket.
Always keep the air inlet and exhaust tube clean.
U se a cloth to clean the housing. Use a soft
cloth to clean the housing. Never use petrol,
solvents or cleaning agents as these may attack
the plastic.

Service

Q
repaired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
lead needs to be replaced, always have
the replacement carried out by the man-
ufacturer or its service centre. This will
ensure that your device remains safe to use.
note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.

Warranty

Q
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof of
purchase. In the event of a warranty claim,
please make contact by telephone with our
Service Department. Only in this way can a
post-free despatch for your goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
Have your device
If the plug or mains
Cleaning / Service / Warranty / Disposal
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Your statutory rights are not restricted in any way
by this warranty.
The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.
Gb
Service Great britain
Tel.: 0871 5000 720
(0.10 GbP/Min.)
e-mail: kompernass@lidl.co.uk
IAn 103976
Ie
Service Ireland
Tel: 1890 930 034
(0.08 eUR/Min. (peak)
0.06 eUR/Min. (off peak))
e-mail: kompernass@lidl.ie
IAn 103976

Disposal

Q
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electric tools
in the household waste!
In accordance with European Directive 2012 / 19 / EU
(covering waste electrical and electronic equipment)
and its transposition into national legislation, worn out
electrical power tools must be collected separately
and taken for environmentally compatible recycling.
GB/IE 9