Herunterladen Inhalt Inhalt Diese Seite drucken

General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Parkside PWS 125 A1 Originalbetriebsanleitung

Winkelschleifer
Vorschau ausblenden Andere Handbücher für PWS 125 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 76
WARNING!
The vibration level varies in accordance with
the use of the tool and may be higher than
the value specifi ed in these instructions in
some cases. It is easy to underestimate the
vibration load if the electrical power tool is
used regularly in this manner. For an accurate
estimate of the vibration load during a certain
working period, the times during which the
appliance is switched off or is running but not
actually being used must also be taken into
consideration. This can signifi cantly reduce
the vibration load over the total working
period.
Explanation of the symbols on the appliance!
Read the original operating
instructions and safety instruc-
tions before initial operation.
Wear ear protection!
Wear protective glasses!
Wear sturdy work boots!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding
Not approved for side grinding
Using damaged cutting or
grinding discs is dangerous
and may cause serious injury!
PWS 125 A1
General Power Tool
Safety Warnings
WARNING!
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fi re and/or serious
injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of fl am-
mable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.

2. Electrical safety

a) Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
GB
IE
3

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 102828

Inhaltsverzeichnis