Introduction; Intended Use; Features; Package Contents - Parkside PWS 125 A1 Betriebsanleitung

ANGLE GRINDER PWS 125 A1

Introduction

Congratulations on the purchase of your
new appliance. You have selected a high-
quality product. The operating instructions
GB
are part of this product. They contain
important information on safety, usage
and disposal. Before using the product, familiarise
yourself with all operating and safety instructions.
Use the product only as described and for the
areas of applications specifi ed. Please also pass
these operating instructions on to any future
owner(s).

Intended use

The appliance is intended for cutting, rough cutting
and brushing metal work materials without the use
of water. Any other usage of or modifi cation to the
appliance is deemed to be improper usage and
carries the risk of serious personal injury. The manu-
facturer accepts no responsibility for damage(s)
resulting from improper usage.
The appliance is not meant for commercial use.
NOTE
► Slots in load-bearing walls are subject to
the standard DIN 1053 part 1 or country-
specifi c regulations. These provisions must be
strictly adhered to. Please seek the advice of
the responsible structural engineer, architect,
or the supervising construction management.

Features

Safety lock-out
ON/OFF switch
Cover for carbon brushes
Additional handle
Adjustable blade guard
Tensioning nut
Mounting spindle
Mounting fl ange
Metal cutting disc
Spindle locking button
Rotational speed preselector adjusting wheel
Spanner (Fig. B)
Screws
18

Package contents

1 angle grinder PWS 125 A1
1 metal cutting disc
1 additional handle
1 blade guard
1 spanner
1 operating instructions

Technical data

Nominal load: 1200 W
Rated voltage: 230–240 V ~ 50 Hz
Rated speed: n 12000 min
Continuously variable
rotational speed: 3000–12000 min
Spindle thread: M14
Protection class: II /
Noise and vibration data:
Noise measurement value determined in accordance
with EN 60745 The A-rated noise level of the
power tool is typically:
Sound pressure level: L
Uncertainty: K =
Sound power level: L
Uncertainty: K =
Vibration values:
Angle grinding
(main handle): a
Angle grinding
(additional handle): a
Uncertainty: K =
Wear ear protection!
NOTE
► The vibration level specifi ed in these instruc-
tions has been measured in accordance
with the standardised measuring procedure
specifi ed in EN 60745 and can be used to
make equipment comparisons. The specifi ed
vibration emission value can also be used to
make an initial exposure estimate.
-1
-1
= 91 dB (A)
PA
3 dB (A)
= 102 dB (A)
WA
3 dB (A)
= 13.431 m/s 2
h, AG
= 9.770 m/s 2
h, AG
1.5 m/s 2
PWS 125 A1