Herunterladen Inhalt Inhalt Diese Seite drucken

Recharging The Battery; Checking The Battery Charge Level; Operation; Direction Switch - Parkside PAWS 3.6 A1 Bedienungs- Und Sicherheitshinweise

Akku-wechselbitschrauber
Vorschau ausblenden Andere Handbücher für PAWS 3.6 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 68
Charge the battery in a dry room
only.
There is a risk of injury due to elec-
tric shock.
Only use the original charger from
the package to charge the battery.
Mind not to charge the appliance
for more than 3 hours at a time. If
you do, the battery and the appli-
ance may be damaged and longer
charging times would be a waste
of energy. Excessive charging will
void the warranty.
Charge the battery before the first
time of use. Do not briefly charge
the battery several time in a row.
Recharge the battery when you no-
tice that the appliance is becoming
slower.
Always take heed of the applicable
safety instructions as well as the en-
vironmental protection regulations
and information.
The warranty excludes all defects
caused by improper handling.

Recharging the battery

1. Connect the charger plug to the
charging socket (
vice.
2. Plug the battery charger (
into a mains outlet.
3. When the battery is fully re-
charged unplug the battery
charger (
Red LED lights up
Green LEDs light up
4) of the de-
9)
9) from the mains.
Battery charging
Battery fully
charged
Checking the battery charge
level
The battery's charge level is indicated by
the charge state indicator (
The state of charge of the battery is displa-
yed by illuminating the appropriate LED
lights. In order to activate the display, the
on/off switch (
6) must be pressed.
Green LED lights up
Battery fully charged
Red LED lights up
Battery needs to be charged

Operation

1. Direction switch

You can toggle between right and left ro-
tation by pushing the direction of rotation
switch (
5).
If you move the direction switch (
the middle position, the device is secured
against being switched on.
The direction changed may
only be performed in stand-
still mode!
2. Bit selection from the
bit changeable drum
Push the slide of the interchangeable cord-
less screwdriver (
B
Turn the bit changeable drum to the left or
right until the desired bit is located on top
and is in line with the bit holder (
bit changeable drum engages audibly.
GB
3).
5) to
12) forward.
2). The
IE
11

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Ian 60489

Inhaltsverzeichnis