Application; General Description; Delivery Contents; Description Of Operation - Parkside PNTS 1400 D1 - IAN 100131 Originalbetriebsanleitung

Application

The appliance is intended for domestic wet
and dry vacuuming in, for example, the
house, work room, car or garage.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.
Vacuuming of flammable or explosive
materials or those which endanger health
is prohibited. The manufacturer will not be
held responsible for injuries resulting from
use which does not comply with the direc-
tions, or from incorrect use.

General description

The illustration of the principal
functioning parts can be found on
the front and back foldout pages.

Delivery Contents

Unpack the equipment and check that it is
complete.
The equipment is supplied with the motor
head on (see 3). To take off the motor
head and remove the accessories,
- release the locking lever (
and
- fold down the bow handle tie bars
( 2) towards the suction nozzle
( 8).
- Motor housing
- Stainless steel container
- Bow handle
- 4 steering castors with accessory
holders
- Telescopic suction pipe
- Suction hose
- Handle with air regulation
- Foam filter
- Fluted filter with filter cover
(already mounted)
- Paper filter bag
- Switchable household nozzle
- Crevice nozzle
- 6 cross-head screws
- Instruction Manual
Dispose of the packaging material in a
proper manner.

Description of operation

The equipment is fitted with a stable stain-
less steel container to hold liquid and dust.
The steering castors allow for maximum
mobility of the device. For wet vacuuming,
the suction airflow is switched off by a float
when the stainless steel container is full. The
14) equipment also has a blow function.
To prevent electrostatic charging during
vacuuming, an anti-static chain is fitted on
the bottom of the equipment.
The following describes the function of the
operating parts.
GB IE
5