Service; Safety Notices Specific To Routers; Supplementary Instructions; Original Accessories / Tools - Parkside POF 1200 A1 Originalbetriebsanleitung

be performed. Use of the power tool for
operations different from those intended could
result in a hazardous situation.

5. Service

a) Have your power tool serviced by a
qualified repair person using only iden-
tical replacement parts. This will ensure
that the safety of the power tool is maintained.

Safety notices specific to routers

Only hold the power tool by the insu-
lated handle areas as the router may
touch the tool's mains cable. Contact
with a live wire could cause metal parts of the
device to become live and lead to electric shock.
Fix and secure the work piece to a
stable surface using clamps or other
means. When only securing the work piece
by hand or against your body it will remain
unstable, which could lead to loss of control.
Wear a dust mask.

Supplementary Instructions

The permissible rotational speed of the
router tool must be at least as high as
the maximum speed indicated on the
electrical power tool. Parts used at higher
than permissible speeds may be ruined.
The router or other parts must fit pre-
cisely in the collet (shaft diameter 6/8)
of your electric power tool. Cutting tools
which do not fit precisely in the collet of the
electric power tool turn unevenly, vibrate strong-
ly and can lead to a loss of control.
Always switch on the electrical power
tool before placing it against the work-
piece. There is also the risk of kickback if the
electric power tool becomes caught in the
work-piece.
Keep your hands away from the cut-
ting area and the router. Keep your
General power tool safety warnings / Start-up
second hand on the additional handle
or on the engine housing. If you hold the
router with both hands, they cannot be injured
by the router.
Never use on metal objects, nails or
screws. The router can become damaged
and this may lead to higher vibrations.
Use suitable detectors in order to look
for hidden supply lines, or consult your
local power authority. Contact with elec-
tric lines can lead to fire and electric shocks.
Damage to a gas line can lead to explosions.
Breaking a water line can cause damages.

Original accessories / tools

Use only the accessories and attachments
detailed in the operating instructions,
or those which are compatible with
the device.

Start-up

Router set / Applications

Original attachment included in delivery:
To profile:
Round and profile cutter ∅ 22 mm / R 6.3 mm
32
Round and profile cutter ∅ 28.6 mm / R 9.5 mm
33
Round and profile cutter ∅ 25 mm / R 4 mm
34
Hollow cutter ∅ 12.7 mm / R 6.3 mm
35
Hollow cutter ∅ 22 mm / R 6.3 mm
36
V-groove cutter ∅ 12.7 mm / Angle 90°
37
Bevel cutter ∅ 32 mm / Angle 45°
38
Flush cutter ∅ 12.7 mm
39
To connect:
Dovetail cutter ∅ 12.7 mm / Angle 14°
40
Slot cutter ∅ 6 mm
41
Slot cutter ∅ 12 mm
42
Slot cutter ∅ 16 mm
43
Note: Provided the router's ball bearing has loos-
ened, tighten it with the Allen key provided in the
router set.
GB 9