Philips HD9385/20 Bedienungsanleitung

ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at
www.philips.com/welcome.
Important
Read this important information carefully before you use the appliance and
save it for future reference.
Warning
- Avoid spillage on the connector
- Do not misuse this kettle for other than its intended
use to avoid potential injury
- Do not use the appliance if the plug, the mains
cord, the base or the kettle itself is damaged. If the
mains cord is damaged, you must have it replaced
by Philips, a service centre authorised by Philips or
similarly qualified persons in order to avoid a hazard.
- This appliance can be used by children aged from
8 years and above and by persons with reduced
physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given
supervision or instruction concerning use of the
appliance in a safe way and if they understand the
hazards involved. Cleaning and user maintenance
shall not be made by children unless they are older
than 8 and supervised. Keep the appliance and its
cord out of reach of children aged less than 8 years.
- Children shall not play with the appliance.
- Keep the mains cord, the base and the kettle away
from hot surfaces.
- Do not place the appliance on an enclosed surface
(e.g. a serving tray), as this could cause water to
accumulate under the appliance, resulting in a
hazardous situation.
- Unplug the appliance and let it cool down before
you clean it. Do not immerse the kettle or base in
water or any other liquid. Only clean the appliance
with a moist cloth and a mild cleaning agent.
Caution
- Only connect the appliance to an earthed wall
socket.
- Only use the kettle in combination with its original
base.
- The kettle is only intended for heating up and boiling
water.
- Never fill the kettle beyond the maximum level
indication. If the kettle has been overfilled, boiling
water may be ejected from the spout and cause
scalding.
- Be careful: the outside of the kettle and the water in
it become hot during and some time after use. Only
lift the kettle by its handle. Also beware of the hot
steam that comes out of the kettle.
- This appliance is intended to be used in household
and similar applications such as farm houses, bed and
breakfast type environments, staff kitchen areas in
shops, in offices and in other working environments
and by clients in hotels, motels and other residential
type environments.
Boil-dry protection
This kettle is equipped with boil-dry protection: it switches off automatically if
you accidentally switch it on with no or not enough water in it. Let the kettle
cool down for 10 minutes and then lift the kettle off its base. Then the kettle
is ready for use again.
Electromagnetic fields (EMF)
This Philips appliance complies with all standards
regarding electromagnetic fields (EMF).
Heating up water with preset buttons
Different hot drinks require different temperatures to taste their best. With
the preset buttons on the base, you can choose the right temperature for
your favourite hot drink.
Always fill the kettle with at least 0.25l water to make sure that the selected
hot drink reaches the right temperature. The actual temperature may deviate
slightly from the indicated temperature.
- There are 4 buttons that represent different hot drinks:
1 Black tea (100ºC)
2 Green tea (80ºC)
3 Herbal/fruit tea (100ºC)
4 Instant coffee (90ºC).
- While the kettle heats the water to the preset temperature, the light ring
around the selected button pulsates slowly until the water has reached
the preset temperature.
- When the water has reached the preset temperature, you hear a signal.
The light ring around the selected button stops pulsating and lights up
continuously. After 2 minutes, you hear the signal again.
Note: You can select a different type of hot drink by pressing a different button
while the kettle is operating. This is only possible if the temperature of the water
is still below the temperature of the newly pressed button.
Note: You can deactivate the appliance by pressing the selected button again or
by removing the kettle from the base.
Keeping water warm at the preset temperature
You can use the keep-warm function to keep water warm at the preset
temperature for 30 minutes.
To activate the keep-warm function, press the KEEP WARM button after
you have pressed the desired preset button. The light ring around the KEEP
WARM button lights up continuously. When the water has reached the preset
temperature, the light ring around the KEEP WARM button pulsates slowly
for 30 minutes. If you want to cancel the keep-warm function, press the KEEP
WARM button or remove the kettle from the base.
Note: The keep-warm function keeps the water warm for 30 minutes. After this,
you hear a signal and the kettle switches off automatically.
Note: If you press another preset button while the keep-warm function is
activated, you need to reactivate the keep-warm function as well.
Cleaning
- Always unplug the base before you clean it
- Never immerse the kettle or its base in water.
Cleaning the kettle and the base
Clean the outside of the kettle and the base with a
moistened soft cloth.
Caution: Do not let the moist cloth come into contact with
the cord, the plug and the connector of the base.
Descaling the kettle
Depending on the water hardness in your area, scale
may build up inside the kettle over time. Scale may
affect the performance of the kettle. Descale the kettle
regularly by following the instructions in this user
manual.
We recommend the following descaling frequency:
- Once every 3 months for soft water areas (up to
18dH).
- Once every month for hard water areas (more than
18dH).
Use white vinegar (4% acetic acid) in step 6. Rinse the
kettle and then boil twice (steps 10-12) to remove all
vinegar.
1
2 3 4 5
6 7 8 9
10 11 12 13
Always there to help you
HD9385/20
User manual
4222.005.0386.5