Cleaning And Maintenance - EuroLite LED TMH-14 Bedienungsanleitung

128 160 80 A0 50% 63%
161 200 A1 C8 63% 78%
201 255 C9 FF 79% 100%
14
0 255 00 FF 0% 100%
0 10
15
11 120 0B 78
121 244 79 F4 47% 96%
245 255 F5 FF 96% 100%
16
0 255 00 FF 0% 100%
0 149 00 95
11 17
150 200 96 C8 59% 78%
201 255 C9 FF 79% 100%

CLEANING AND MAINTENANCE

The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
We recommend a frequent cleaning of the device. Please use a moist, lint-free cloth. Never use alcohol or
solvents!
The lens has to be replaced when it is obviously damaged,
so that its function is impaired, e. g. due to cracks or deep scratches!
The objective lens will require weekly cleaning as smoke-fluid tends to building up residues, reducing the
light-output very quickly. The cooling-fans should be cleaned monthly.
The interior of the fixture should be cleaned at least annually using a vacuum-cleaner or an air-jet.
There are no serviceable parts inside the device. Maintenance and service operations are only to be carried
out by authorized dealers.
00 0A 0% 4%
4% 47%
0% 58%
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
Switching colors
S
S Fading colors, fade in and fade out
S Fading colors
Color change speed
F
Increasing speed
Internal programs
S No function
S Internal program 1
Internal program 2
S
S Music control
Internal programs speed
F
Increasing speed
Reset
S No function
S Reset all motors
S No function
CAUTION!
26/28 00094211.DOC, Version 1.0