Control Board; Dmx-Controlled Operation; Addressing - EuroLite LED TMH-14 Bedienungsanleitung

Control Board

The Control Board offers several features: you can simply set the starting address, run the pre-programmed
program or make a reset.
The main menu is accessed by pressing the Menu-button. Browse through the menu by pressing Up or
Down. Press the Enter-button in order to select the desired menu. You can change the selection by pressing
Up or Down. Confirm every selection by pressing the Enter-button. You can leave every mode by pressing
the Menu-button. The functions provided are described in the following sections.
Main menu
Sub menu
Addr d001-d512
CH11
CHSE
CH17
dMH
FASt
Mode
SLou
Soun
SEnS SE00-SE99
on
PAn
oFF
on
tiLt
oFF
rEd
GrEE
bALA
bLuE
uHiL
dEFA
YES
rESt
YES

DMX-controlled operation

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features. The individual channels and their features are listed under DMX-protocol.

Addressing

The device has two different DMX channel modes. The Control Board allows you to assign the DMX starting
address, which is defined as the first channel from which the LED TMH-14 will respond to the controller.
If you set, for example, the address in the 17 channel mode to channel 18, the device will use the channel 18
to 34 for control.
Please, be sure that you don't have any overlapping channels in order to control each LED TMH-14 correctly
and independently from any other fixture on the DMX-chain.
Sub menu 2
DMX address setting
Default setting: d001
Setting DMX channel mode
Default setting: CH17
DMX controlled mode
Default setting
Master mode internal program/auto
program; fast speed
Master mode internal program/auto
program; fast speed
Master mode internal sound controlled
program
Setting mic sensitivity
Default setting: SE80
PAN Reverse
Default setting: oFF
TILT Reverse
Default setting: oFF
r000-r255
Dimmer intensity of LED colors/limitation
G000-r255
000 – 255 (increasing)
b000-r255
Default setting: 255
u000-r255
Reload Default
Reset all
24/28
Function
00094211.DOC, Version 1.0