IKEA BEJUBLAD Anleitung Seite 19

ENGLISH
Problem
The oven lamp does not op-
erate.
The Pyrolysis does not start.
The display shows C1.
The Pyrolysis does not start.
The display shows C2.
The Pyrolysis does not start.
The display shows C3.
The display shows F102.
The oven does not heat up.
The display shows Demo.
Possible cause
The oven lamp is defective.
The shelf supports are not
removed.
The Pyrolysis or Defrost
function is set when the plug
of the core temperature sen-
sor is in the socket.
The door is not fully closed
or the door lock is defective.
The door is not fully closed
or the door lock is defective.
The demo mode is activa-
ted.
Remedy
Replace the oven lamp.
Remove the shelf supports.
Remove the plug of the core
temperature sensor from the
socket.
Fully close the door.
1. Fully close the door.
2. Deactivate the appli-
ance with the house
fuse or the safety switch
in the fuse box and acti-
vate it again.
3. If the display shows
F102 again, contact the
service centre.
1. Deactivate the appli-
ance.
2. Press and hold the but-
ton +.
3. When an acoustic signal
sounds, turn the knob
for the oven functions to
the first function. Demo
flashes in the display.
4. Turn the knob for the
oven functions to the off
position.
5. Release the button +.
6. Turn the knob for the
temperature clockwise
three times. The acoustic
signal sounds three
times. The demo mode
is deactivated.
19