Herunterladen Inhalt Inhalt Diese Seite drucken

Grundig GV 440 NIC Servicehandbuch Seite 48

Inhaltsverzeichnis

Werbung

3. Playback
Freeze-Frame Stepping,
Forwards or Reverse*
K
Press the
button during playback (playback pause).
Freeze-frame
Preceding
Next
freeze-frame
freeze-frame
Preceding
Next
freeze-frame
freeze-frame
Preceding
Next
freeze-frame
freeze-frame
. . .
...
By turning the jog knob you can view the previous or the fol-
lowing individual freeze-frames step by step (see illustration).
»JOG II « appears in the display of the recorder.
Depending on the direction in which you turn the knob, you
can select the previous or the following freeze-frame.
J
Press the
button to switch back to playback.
Changing the Slow-Motion Speed,
Forward or Reverse*
During playback, turn the shuttle-ring to switch to forward or
reverse slow motion.
Turning the jog-knob reduces the slow motion speed (see
illustration).
Outer ring
Outer ring
Adjust slow motion in reverse
Adjust slow motion in forward
direction
direction
The following appears in the display of the recorder:
»S L O W
II « or »S L O W
«
Depending on the direction in which you turn the knob, the
slow motion speed increases or decreases.
By turning the shuttle-ring you can set any desired slow-
motion speed.
J
Press the
button to switch back to normal playback.
* You may experience picture disturbance with long-playing mode and NTSC playback.
4. Fast Tape Wind and Search Functions
Fast Tape Wind
`
Press the
button.
Fast rewind
Stop
Fast forward wind
At the beginning or end of the tape, the recorder switches to
`
stop. Terminate tape winding with the
button.
Locating a Certain Tape Position/
GO-TO Function
This function allows you to automatically wind the tape to a
certain position.
There are two ways of doing this:
by entering the playing time, or
by entering the tape position.
Go-to by entering the playing time
If the tape position is displayed, switch to the playing time
display by pressing the
o
button.
k
Press the
button. You will see this in the display of the
recorder: »G O T O « and "– – – ".
Now enter the desired playing time as three digits with the
1
0
numbered buttons
...
, then press the
button.
OK
Example:
k
Press the
button, enter the playing time (e.g. 48 min-
0 4 8
utes) with the numbered buttons
, then press the
button.
OK
When the last entry is completed, the tape is wound to the
respective position and playback is started.
For selecting the playing time with non-standard hours-
l
cassettes, you must first press the
button, then enter
1
0
the total playing time with the numbered buttons
...
and then confirm with the
button.
OK
Go-to by entering the tape position
o
If the playing time is displayed, press the
to switch to
the tape position time display.
k
Press the
button, then enter the desired tape position as
1
0
three digits with the numbered buttons
...
.
Press the
button to start the Go-to function.
OK
Example:
Tape is at position »I :3 0 :00«
Desired tape position = »0: 0 I :00 «
k 0 0 1 ¶
Enter the following =
OK
.
The last two digits are not entered.
Locating a Certain Recording/
Automatie Programme Finder (APF System)
This system allows you to locate the beginning of any of your
own recordings quickly and accurately.
For this, electronic "marks" (VISS marks = Video Index
Search system) are automatically placed at the beginning of
each of your own recordings.
The "marks" can be entered as one or two-digit numbers.
Example:
The tape is wound to the beginning and you wish to see the
k
5th recording. Press the
button, then the numbered but-
5
ton
for the fifth mark, and then turn the shuttle-ring to the
right.
You will see this in the display of the recorder: »A PF
« .
The tape is automatically wound to the beginning of the 5th
recording and playback is started there.
If you wish to see the 3rd recording – related to the beginning
to the tape – after the 5th recording (= 6th mark), then you
k
must go back 3 recordings (= 4 marks) by pressing the
,
4
button, then the numbered button
, and then turning the
shuttle ring to the left.
You will see this in the display of the recorder: »A PF
« .
The tape is automatically wound to the beginning of the 3rd
recording and playback is started there.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis