Yamaha 01V96 V2 Bedienungsanleitung Seite 317

function
SCENE RECALL 0x00 0-99, 8192
EQ LIB RECALL 0x01 1-200, 8192
GATE LIB RECALL 0x02 1-128, 8192
COMP LIB RECALL 0x03 1-128, 8192
EFF LIB RECALL 0x04 1-128, 8192
CHANNEL LIB RECALL 0x06 0-128, 8192
INPATCH LIB RECALL 0x07 0-32, 8192
OUTPATCH LIB RECALL 0x08 0-32, 8192
SCENE STORE 0x20 1-99
EQ LIB STORE 0x21 41-200
GATE LIB STORE 0x22 5-128
COMP LIB STORE 0x23 37-128
EFF LIB STORE 0x24 xx(*2)-128
CHANNEL LIB STORE 0x26 1-128
INPATCH LIB STORE 0x27 1-32
OUTPATCH LIB STORE 0x28 1-32
*1) 0:CH1 – 31:CH32, 32:ST-IN1L - 39:ST-IN4R, 128:BUS1 – 135:BUS8,
256:AUX1 – 263:AUX8, 512:STEREO
Use 256 if the recall destination or store source is a single data item.
Effect is 0:Effect 1–3:Effect 4
If the store destination is 16383 (0x3FFF), this indicates that the li-
brary data has been changed by a external cause (such as bulk re-
ception)
(only transmitted by the 01V96)
*2) Varies with the firmware version.
2.8.3.11 Parameter change
Reception
When this is received, the title of the specified memory/library will be changed.
If this is received from Studio Manager or Cascade Link, the operation will be
executed, and then the result of execution will be transmitted as a parameter re-
sponse.
Transmission
In response to a request, this is transmitted with the device number set to the
[Tx CH].
When the title is changed on the 01V96, this message will be transmitted with
the device number set to [Tx CH].
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010000 10
title
0100ffff 4f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
title 1
DATA 0ddddddd dd
:
: :
title x(depend on the library)
0ddddddd dd
End of exclusive
EOX 11110111 F7
function
SCENE LIB TITLE 0x40 0-99,256(0:response only)
EQ LIB TITLE 0x41 1-200(1-40:response only)
GATE LIB TITLE 0x42 1-128(1-4:response only)
COMP LIB TITLE 0x43 1-128(1-36:response only)
EFF LIB TITLE 0x44 1-128(1-xx(*1):response only)
CHANNEL LIB TITLE 0x46 0-128(0:response only)
INPATCH LIB TITLE 0x47 0-32(0:response only)
OUTPATCH LIB TITLE 0x48 0-32(0:response only)
*2) Varies with the firmware version.
2.8.3.12 Parameter request
Reception
When this is received, a parameter change will be transmitted with the device
number set to [Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
number channel*1) tx/rx
256 tx/rx
0-513 tx/rx
0-95 tx/rx
0-513 tx/rx
0-3 tx/rx
0-513 tx/rx
256 tx/rx
256 tx/rx
256, 16383 tx/rx
0-513, 16383 tx/rx
0-31, 16383 tx/rx
0-513, 16383 tx/rx
0-3, 16383 tx/rx
0-513, 16383 tx/rx
256, 16383 tx/rx
256, 16383 tx/rx
(Function call: title)
number size
16
16
16
16
16
16
16
16
(Function call: title)
MIDI-Datenformat
Function call
ADDRESS 00010000 10
title
0100ffff 4f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
2.8.3.13 Parameter change (Function call: Scene/Library
Clear)
Reception
When this is received, the specified memory/library will be cleared. If this is re-
ceived from Studio Manager or Cascade Link, the operation will be executed,
and then the result of execution will be transmitted as a parameter response.
Transmission
When a memory or library is cleared on the 01V96, this message will be trans-
mitted with the device number set to [Tx CH].
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010000 10
clear function
0110ffff 6f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
function
SCENE LIB CLEAR 0x60 1-99
EQ LIB CLEAR 0x61 41-200
GATE LIB CLEAR 0x62 5-128
COMP LIB CLEAR 0x63 37-128
EFF LIB CLEAR 0x64 xx-128 (*1)
CHANNEL LIB CLEAR 0x66 1-128
INPATCH LIB CLEAR 0x67 1-32
OUTPATCH LIB CLEAR 0x68 1-32
*2) Varies with the firmware version.
2.8.3.14 Parameter change (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, the attribute of the specified memory/library will be
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted on the
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
attribute
0000ffff 0f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
attribute(protect:0x0001, normal:0x0000)
DATA 0ttttttt tt
0ttttttt tt
End of exclusive
EOX 11110111 F7
function
SCENE LIB ATTRIBUTE 0x00 0-99(0:response only)
2.8.3.15 Parameter request (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
01V96 Version 2—Bedienungsanleitung
317
number
number