Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Meaning of LEDs
Connection diagrams can be found in the documentations of the
corresponding AC controllers.
LED meaning with AC applications:
yellow
green
red
LED
Basic
After reading
colour
condition
a card
yellow
on
yellow
off
green
on
red
on
green
on
red
on
red
blinking
Additionally, the key and LED functions of the macro control of IQ
MultiAccess are valid (see separate manual "Supplementary functions
of IQ MultiAccess", P32205-46-0G0-xx).
Using the device correctly
Tap the device lightly with fingertips. Never strike or apply strong
pressure to the device.
The use of hard or sharp objects, including fingernails, rings, etc. can
cause scratches and damage the device.
To clean:
Wipe the device with a dry soft lint-free cloth, or one that has
been lightly dampened with water.
The use of caustic liquids such as benzene, thinners, alcohol, solvents,
or abrasive cleaners of any kind will lead to surface deterioration and
damage.
Honeywell Security & Data Collection
Novar GmbH
Johannes-Mauthe-Straße 14
D-72458 Albstadt
www.honeywell.com/security/de
Meaning
Operation / ready to read
Device is idle
PIN-Code or door code
entry is active
(only possible with readers
with RS-485 interface)
Permanently released
Permanently blocked
Door release
ID card not authorized
Read error
P30704-45-002-00
2008-10-01
© 2008 Novar GmbH
Dimensions (in mm)
40
172
200
Werbung
