Specifications - Monacor MMX-8 Bedienungsanleitung

5) Set the input controls (1) of the chan-
GB
nels to which no unit has been con-
nected to "0". Set the other controls
to mid-position first.
6) Adjust the output level with the con-
trols MASTER LEFT and MASTER
RIGHT so that the following unit is
adjusted to an optimum level.
7) Adjust the mixing ratio of the inputs
with the input controls (1) accord-
ingly. The LEDs ON PK above the
controls MASTER LEFT and MAS-
TER RIGHT indicate the output level.
Correct the output level with the con-
trols MASTER LEFT and MASTER
RIGHT, if required.
8) Individual channels are faded in and
out with the corresponding input con-
trols (1), if required. The output signal
is faded in and out with the controls
MASTER LEFT and MASTER RIGHT.
All rights reserved by MONACOR
this instruction manual may be reproduced in any form or by any means for any
commercial use.
10

7 Specifications

Inputs
MIC: . . . . . . . . . . . 5 mV/10 kΩ
LINE: . . . . . . . . . . . 50 mV/ 20 kΩ
Outputs: . . . . . . . . . . 100 mV/ 2 kΩ
Frequency range: . . . 20 – 20 000 Hz
THD: . . . . . . . . . . . . . < 0.4 %
S / N ratio: . . . . . . . . . 55 dB
Power supply: . . . . . . 9 V /15 mA
Dimensions: . . . . . . . 150 × 115 ×
Weight: . . . . . . . . . . . 700 g
Subject to technical modification.
INTERNATIONAL GmbH & Co. KG. No part of
®
(battery or PSU)
68 mm