Epson SC-T7000 Series Handbuch Seite 3

Item Description
Margin Options Add Margins Add the value selected for Margin (area C
in Image 1) to the hard clip area specified
in the data PS commands (area B in Image
1). The option selected for Output Size
(area A in Image 1) is ignored.
If you do not define a size for area B, the
drawing area will be the size selected for
Output Size.
Clip By Margins The drawing area is the value selected for
Output Size (area A in Image 2) less the
value selected for Margin (area C in Image
2).
If the resulting drawing area is larger than
the hard clip area specified in the data
PS commands (area B in Image 2), the
portions of the drawing outside the hard
clip area will not be printed.
Image 1 Image 2
2