Network Connection - Epson EMP-8300 Installationshandbuch

Network Connection

The projector can be used in a LAN system once a network connection has been
established. The connection can be established by means of EasyConfiguration.
Network configuration examples are given in the "Examples of Network
Connection Configurations" section of the EasyMP.net Operation Guide.
When connecting the projector to the network using a network cable, plug the
network cable into the Network port of the projector, and establish a network
connection using EasyConfiguration ( p.21).
When connecting the projector to the network via the wireless LAN, plug the
wireless LAN card into the PC card slot of the projector ( p.13) and establish a
network connection using EasyConfiguration ( p.23)
10