Introduction; Intended Use; Features; Package Contents - Parkside PSSA 20-Li A1 Originalbetriebsanleitung

CORDLESS SABRE SAW
PSSA 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety in-
structions. Use the product only as described and for
the range of applications specified. Please also pass
these operating instructions on to any future owner.

Intended use

This appliance is designed for sawing, cutting to
length and adapting wood, plastics, metal and
construction materials. The sabre saw is suitable for
rough sawing work, straight and curved cuts and
cuts off surfaces flush. Heed the information con-
cerning saw blades and practical advice on sawing.
Any other uses of or modifications to the machine
are deemed to be improper usage and may result in
serious physical injury. The manufacturer accepts no
responsibility for damage(s) attributable to misuse.
This appliance is not intended for commercial use.

Features

Saw blade
Footplate
Quick-release chuck
Pendulum stroke switch
Ventilation slits
Safety lock-out
ON/OFF switch
Handle
Battery charge level button
Battery display LED
Battery pack*
Release button for battery pack
Locking lever for footplate
Red charge control LED
Green charge control LED
High-speed charger*
│ GB │ IE │ NI
■ 2

Package contents

1 cordless sabre saw PSSA 20-Li A1
1 saw blade for wood HCS 150 mm
1 carrying case
1 set of operating instructions

Technical data

Cordless sabre saw: PSSA 20-Li A1
Rated voltage:
Rated idle stroke speed:
Stroke length:
Max. cutting performance: Wood 100 mm
Sawblade mounting:
Use only the following battery to operate
the cordless tool: PAP 20 A1*
Type:
Rated voltage:
Capacity:
Cells:
Use only the following high-speed battery
charger to charge the cordless tool:
PLG 20 A1*
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
* BATTERY AND CHARGER ARE NOT SUPPLIED
Noise emission value:
Noise measurement value determined in accor-
dance with EN 60745. The A-rated noise level of
the tool is typically:
Sound pressure level:
Uncertainty:
Sound power level:
Uncertainty:
20 V (DC)
n 0–3000 rpm
0
20 mm
Metal 8 mm
1 / " (12.7 mm)
2
LITHIUM ION
20 V (DC)
2.0 Ah
5
230–240 V ~ , 50 Hz
(AC)
65 W
T3.15A
3.15 A
21.5 V (DC)
2.4 A
approx. 60 min
II / (double insulation)
L = 88 dB(A)
PA
K = 3 dB
L = 99 dB(A)
WA
K = 3 dB
PSSA 20-Li A1