Technical Data - Parkside PKGA 16 A1 Betriebsanleitung

GB I E N I

Technical Data

4-in-1 Cordless combination tool ... PKGA 16 A1
Motor voltage .............................. 16 V
Idling speed (n ) ....................21000 min
0
Sound pressure level (L
Sound power level (L
Motor unit with drill attachment ..............PKGA1
Idling speed (n ) ........ 0-400/0-1350 min
0
Torque .................................max. 25 Nm
Spread drill chuck ................... 1.0-10 mm
Drill diameter
for wood .......................... max. 25 mm
for steel ............................. max. 8 mm
Weight (without charger) ................1.4 kg
Vibration (a )
h
drilling in metal .... 1.615 m/s
drilling in wood ... 1.475 m/s
Motor unit with multisander attachment ..PKGA2
Oscillation rate (n
0
Sanding sheet size
Weight (without charger) ................1.3 kg
Vibration (a ) ......4.383 m/s
h
Motor unit with sabre saw attachment ....PKGA3
Stroke rate (n ) .....................0-3200 min
0
Stroke length
Weight (without charger) ................1.7 kg
Vibration (a )
h
Sawing boards ................. 11.926 m/s
Sawing wood beams ........ 12.392 m/s
Motor unit with multifunction tool ...........PKGA4
Oscillation rate (n
0
Oscillation angle ..............................3.0°
Weight (without charger) ................1.3 kg
6
CY
) ........ 86.7 dB(A),
pA
K= 3 dB
) ........... 97.7 dB(A)
WA
K= 3 dB
, K= 1.5 m/s
2
, K= 1.5 m/s
2
) ..............0-9000 min
.......138 x 97 mm
, K= 1.5 m/s
2
...................... 22 mm
K= 1.5 m/s
) ............0-20000 min
Battery (Li-Ion) ................................. PAP16
Nominal voltage .......................... 16 V
Capacity ...................................... 2.0 Ah
Charging time ...................... approx. 1 h
-1
Recharger .................................PLCP-016A
Nominal consumption .....................55 W
Voltage input ............. 230-240 V~, 50 Hz
Voltage output .................. 16.8 V
Protection class .................................
Protection category ...........................IPX0
-1
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure as-
sessment.
2
Warning: The vibration emission
2
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
-1
the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on esti-
2
mated exposure under actual usage
conditions (all parts of the operating
cycle are to be considered, includ-
-1
ing, for example, times during which
the power tool is turned off and
times when the tool is turned on but
is running idle).
2
2
2
-1
2.4 A
II