Herunterladen Inhalt Inhalt Diese Seite drucken

Items Supplied; Proper Use; Safety Information - EINHELL 550 Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
1. Layout
1. Plastic housing
2. Side panels
3. Chassis frame
4. Motor
5. ON/OFF switch
6. Extractor hose
7. PVC sawdust bag
8. Dust bag
9. Quick clamp device for PVC debris bag
10. Quick clamp device for dust bag
11. Holding device for dust bag
12. Wheels
13. Transportation handle
14. Adapter

2. Items supplied

Vacuum extraction device with chassis
Extractor hose with adapter
Dust bag
Debris bag
Quick clamp device for debris bag
Quick clamp device for dust bag

Proper use

The vacuum extraction system is designed for
extracting chippings and dust arising from the
processing of wood or wood-type materials.
The machine must only be used for its intended
purpose!
Any other use is deemed to be a case of misuse.
The user/operator and not the manufacturer will be
held liable for damage and/or injuries of any kind that
result from such misuse.
To use the machine properly you must also observe
the safety regulations, the assembly instructions and
the operating instructions to be found in this manual.
All persons who use and service the machine have
to be acquainted with this manual and must be
informed about the machine's potential hazards.
It is also imperative to observe the accident
prevention regulations in force in your area.
The same applies for the general rules of
occupational health and safety.
The manufacturer shall not be liable for any changes
made to the machine nor for any damage resulting
from such changes.
Even when the machine is used as prescribed it is
still impossible to eliminate certain residual risk
factors.
The following hazards may arise in connection with
the machine's design and construction:
Hazard due to machine defects:
If one or more parts of the machine are defective, the
use of the machine is prohibited. Defective parts
must be replaced immediately. Only replacement
parts which have been approved by the
manufacturer may be used. It is prohibited to make
any changes to the machine.
Hazard due to electric shock:
Only operate the machine at a power source
which is protected by a residual-current circuit
breaker with a residual current of 30 mA!
Socket-outlets must be properly installed,
earthed and tested!
Hazard due to unintentional start-up of the
machine: The power plug must be removed from
the socket-outlet before emptying the sawdust
bag and also when the machine is not in use!
Hazard due to wood dust: The inhalation of
wood dust is a health hazard! Always wear a
protective dust mask when emptying the debris
bag. When disposing of sawdust waste, make
sure you do so in an environmentally-friendly
fashion!
Fire hazard: Never use the machine to extract
hot objects!
Damage to hearing if ear-muffs are not used as
necessary.
Harmful emissions of wood dust when used in
closed rooms.
4. Important information
Please read the directions for use carefully and
observe the information provided. It is important to
consult these instructions in order to acquaint
yourself with the machine, its proper use and safety
precautions.

Safety information

Warning: When using electric tools it is
imperative to take the following basic safety
precautions in order to reduce the risk of electric
shock, injury and fire.
Take due note of all this information before and
whilst working with the machine.
Do not lose these safety regulations.
Guard against electric shock
Avoid body contact with earthed parts.
When equipment is not being used it should be
kept in a dry, closed place out of children's
reach.
Keep mounted attachments sharp and clean to
enable you to work well and safely.
GB
9

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

100

Inhaltsverzeichnis