Before You Start; Features; Checking What's In The Box; Assembly - Pioneer PL-30-K Bedienungsanleitung

01

Features

Simple to use, fully automatic record player
Once you select the record size, all you have to do is press the [START] button to start playing a record. When the
record is done, the player's fully automatic function returns the tone arm to its position.
Stable record playing due to low center of gravity chassis
The bottom of the player has a metal plate to give the entire chassis a low center of gravity. That makes it stable
while playing records even when there are external vibrations.
Equipped with a phono equalizer that can be switched ON/OFF
Being equipped with its own phono equalizer means the player can be connected directly to amps that don't have
a PHONO terminal. If an amp does have a phono equalizer, this function can be turned off.
Comes with a high-performance MM cartridge
Because it comes with a cartridge, you can use it right away.
Comes with a moderately thick rubber mat
The 5 mm thick rubber mat suppresses external vibration while improving the grip between the record and the
turntable–for stable record playing.
Unobtrusive design
Its appearance and finish engender a composed ambience so it harmonizes with your components as well as
your interior.
Detachable power cord
Cables are not obstacles when the player is moved, thus preventing disconnection problems.

Checking what's in the box

Please check that you've received the following supplied accessories:
! Turntable
! Turntable sheet
! Dust cover with removable hinges
! Adapter for EP record
! Balance weight
! Headshell with cartridge
! Spare lead wires
! Power cord
! Operating instructions (this document)
! Warranty sheet
WARNING
Store small parts out of the reach of children and
infants. If accidentally swallowed, contact a doctor
immediately.

Assembly

! Do not remove the twist tie for clamping the tone arm until assembly is completed.
! Connect the power cord after player assembly and all the connections between other devices have been
completed.
1 Set the turntable.
Set the turntable on the center spindle.
! Be careful not to hit the turntable on the main unit or drop it.
2 Turn the turntable so that the roller is visible through the square hole with the ribbon tape
for catching the belt.
4

Before you start

D41-6-4_A1_En