Connections; General Information For Connections; An Example Of Basic Connections - Yamaha NS-P610 Bedienungsanleitung

Caution: Plug in the subwoofer and other audio/video components after all connections are
completed.
● Connect the main, center and rear speakers to the
speaker output terminals of your amplifier with the
provided speaker cords.
* Connect each speaker making sure not to reverse the
polarity (+, –). If the speaker is connected with
reversed polarity, the sound will be unnatural and lack
bass.
* For the main and rear speakers only, connect one
speaker to the left (marked L) terminals of your
amplifier, and another speaker to the right (marked R)
terminals.

An example of basic connections

Basically, connect the subwoofer to the line output (pin jack) terminal(s) of the amplifier. (Refer to page 8 for details.) If your
amplifier does not have any line output terminal, connect the subwoofer to the speaker output terminals of the amplifier. (Refer
to page 9 for details.)
Subwoofer (General model)
OUTPUT INPUT2 AUTO
STANDBY
TO SPEAKERS
LOW HIGH
OFF
FROM AMPLIFIER
INPUT1
VOLTAGE
SELECTOR
240V
POWER
ON
OFF
To AC outlet
Right
Main speakers
6
E-

CONNECTIONS

General information for connections

OUTPUT INPUT2 AUTO
STANDBY
TO SPEAKERS
LOW HIGH
OFF
FROM AMPLIFIER
INPUT1
OUTPUT
MAIN CENTER
WOOFER
FRONT R
A
B
Left
● The subwoofer can be connected to either the line output
(pin jack) terminals or the speaker output terminals of the
amplifier. Choose one of the ways shown in this section
that is more suitable for your audio system. Also, refer to
the owner's manual of your component to be connected
to the subwoofer.
Center speaker
CENTER
REAR
(SURROUND)
SUB
MAIN
A
FRONT L
B
SPEAKERS
Rear speakers
Right
REAR
(SURROUND)
REAR L
CAUTION
SEE INSTRUCTION
MANUAL FOR CORRECT SETTING.
Amplifier
Left