Various Ways Of Connecting The Subwoofer; Connecting The Subwoofer To Line Output (Pin Jack) Terminals Of The Amplifier (The Basic Way) - Yamaha NS-P610 Bedienungsanleitung

Connecting the subwoofer to line output (pin jack) terminals of
the amplifier (The basic way)
Connect the main speakers to the speaker output terminals of the amplifier.
● To connect with a YAMAHA DSP amplifier (or AV
receiver), connect the SUBWOOFER (or LOW PASS etc.)
terminal on the rear of the DSP amplifier (or AV receiver)
to the L INPUT2 terminal of the subwoofer.
Subwoofer (General model)
OUTPUT INPUT2
TO SPEAKERS
FROM AMPLIFIER
INPUT1
VOLTAGE
SELECTOR
240V
POWER
ON
OFF
Amplifier
Notes
● Some amplifiers have line output terminals labeled PRE
OUT. When you connect the subwoofer to the PRE OUT
terminals of the amplifier, make sure that the amplifier
has at least two sets of PRE OUT terminals. If the
amplifier has only one set of PRE OUT terminals, do not
connect the subwoofer to the PRE OUT terminals.
Instead, connect the subwoofer to the speaker output
terminals of the amplifier. (Refer to pages 6 and 7.)
8
E-

Various ways of connecting the subwoofer

AUTO
STANDBY
OUTPUT
TO SPEAKERS
LOW HIGH
OFF
FROM AMPLIFIER
INPUT1
To AC outlet
● To connect the subwoofer to the SPLIT SUBWOOFER
terminals on the rear of the DSP amplifier, connect them
to both the left L and right R INPUT2 terminals of the
subwoofer.
INPUT2 AUTO
STANDBY
LOW HIGH
OFF
SUBWOOFER
(LOW PASS)
SPLIT SUBWOOFER
● When connecting to a monaural line output terminal of
the amplifier, connect the L INPUT2 terminal.
● When connecting to line output terminals of the amplifier,
other speakers should not be connected to the OUTPUT
terminals on the rear panel of the subwoofer. If
connected, they will not produce sound.
Pin plug cord
(included)
Pin plug cords
(not included)