Using The Audio Output Being Played Back - Yamaha YSP-500 Bedienungsanleitung

Adjusting the audio balance
5
Press TEST when you have completed all
your adjustments.
Notes
• All channel levels cannot be adjusted when the stereo playback
(see page 50), My Beam (see page 51), or My Surround (see
page 45) is selected as the beam mode.
• "FRONT L/R" cannot be adjusted when Stereo plus 3 Beam is
selected as the beam mode (see page 45).
• "FRONT L/R" are automatically adjusted depending on the
settings of the other channels when Stereo plus 3 Beam or
stereo playback is selected as the beam mode (see pages 45 and
50).
y
If the level of a particular channel cannot be adjusted, "– –dB"
appears in the front panel display.
Using the audio output being
played back
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
CH LEVEL
TEST
68
En
TEST
MENU
TV/AV
ENTER
YSP
RETURN
1
Set the operation mode selector to YSP.
TV/AV
2
Press CH LEVEL repeatedly (or press
CH LEVEL and
you want to adjust.
The front panel display changes as follows.
CH LEVEL
CH LEVEL
Note
"SWFR" is available only when a subwoofer is connected to
this unit and SWFR is selected for BASS OUT in SOUND
MENU (see page 62).
YSP
/ ) to select the channel
or
ENTER
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB